Versions Compared

Old Version 23

changes.mady.by.user Aravindhan Ayyanathan

Saved on

compared with

New Version 24

changes.mady.by.user Aravindhan Ayyanathan

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Table of Contents


Introduction

The rApp Manager is a lifecycle management service for rApps. It gets the rApp as ASD formatted package and lifecycle manages it based on it instance configuration. It uses ONAP ACM for lifecycle management operations and it integrates with other components for managing the rApp.

ASD package contains the details required to create and integrate the required services/components. Each ASD package contains only one rApp and One rApp can have any number of rApp instances.

Source code repository : https://gerrit.o-ran-sc.org/r/gitweb?p=nonrtric%2Fplt%2Frappmanager.git;a=summary

Architecture



Integrations

The rApp Manager integrated with the below components to support lifecycle managing the rApp.

ACM

Automation Composition Management (ACM) is a framework that supports Life Cycle Management of Automation Compositions. It supports deployment, monitoring, update and removal of Automation Compositions en-bloc, allowing users to manage their features, services, and capabilities as single logical units. More details about ACM can be found here.

ACM-R supports any number of participants and all the participants can be configured through the configuration in the rApp package.

List of participants used by rApp manager sample rApp.

  • A1PMS Participant - It interacts with A1PMS of NONRTRIC. It is capable of lifecycle managing A1PMS service.
  • Kserve Participant - It interacts with Kserve. It is capable of lifecycle managing Kserve inference service.
  • Kubernetes Participant - It interacts with Helm/Kubernetes. It is capable of lifecycle managing Helm charts.
  • DME Participant -  It interacts with DME(ICS) of NONRTRIC. It is capable of lifecycle managing DME entities.

ACM composition and instance details can be provided as part of rApp package and the package structure can be found here.

DME

The DME(Information Coordination Service (ICS)) is a generic service that maintains data subscriptions. Its main purpose is to decouple data consumers and data producers in a multi vendor environment. A data consumer does not need to know anything about the producers of the data. More details about DME can be found here.

It integrates with rApp manager to enable the rApp produce/consume specific type of data(Information Type in DME terms).

Information type, Data producer/consumer information can be provided as part of rApp package and the package structure can be found here.

SME

The SME(CAPIF) stands for Common API framework and it was developed by 3GPP to enable a unified Northbound API framework across 3GPP network functions, and to ensure that there is a single and harmonized approach for API development. More details about DME can be found here.

It integrates with rApp manager to enable the rApp expose/access/discover endpoints.

Service exposure/access related configurations can be provided as part of rApp package and the package structure can be found here.


State Transitions

rApp States

The rApp lifecycle contains 4 states. The state and transitions are as follows,



  1. COMMISSIONED
    rApp will be in this state right after creation and 
    once the DEPRIMING is completed
  2. PRIMING
    This is a transition state. rApp will be in this 
    state once the PRIMING requested for rApp
  3. PRIMED
    rApp will be in this state once the PRIMING is 
    completed. In this state rApp instances can be 
    created
  4. DEPRIMING
    This is a transition state. rApp will be 
    in this state once the DEPRIMING requested for rApp


rApp Instance States

The rApp Instance lifecycle contains 4 states. The state and transitions are as follows,



  1. UNDEPLOYED
    rApp instance gets created in this state and 
    once the rApp Instance undeploy is completed
  2. DEPLOYING
    This is the transition state. rApp instance will
    be in this state once DEPLOY is requested
  3. DEPLOYED
    rApp instance will be in this state once the 
    rapp instance deployment is completed.
  4. UNDEPLOYING
    This is a transition state. rApp instance will
    be in this state once UNDEPLOY requested for 
    rApp instance


Flows

rApp flow

Create rApp

  1. API user creates rApp by sending rApp package
  2. rApp Manager validates the rApp
  3. rApp Manager stores the rApp in the file system if the rApp is valid
  4. API user provided with the status of rApp creation.
  5. API user request to Prime the rApp
  6. rApp Manager fetches the ACM composition from rApp package and 
    creates the ACM composition in ACM-R
  7. rApp Manager gets the ACM composition creation status from ACM-R
  8. rApp Manager request ACM-R to prime the ACM composition 
  9. rApp Manager gets the ACM composition priming status from ACM-R
  10. rApp Manager checks with DME for the unknown information type from rApp package
  11. rApp Manager get the information type availability from DME
  12. API user provided with the status of rApp priming

Delete rApp

  1. API user request to Deprime rApp
  2. rApp Manager request ACM-R to deprime the ACM composition 
  3. rApp Manager get the status of ACM composition depriming.
  4. rApp Manager requests ACM-R to delete the ACM composition 
  5. rApp Manager gets the status of ACM composition deletion
  6. API user provided with the deprime rApp status.
  7. API user request to delete the rApp
  8. rApp Manager validates that the rApp is in COMMISSIONED state and 
    there is no rApp Instances are available.
  9. API User provided with delete rApp status


rApp Instance flow

Create rApp Instance

  1. API user request to create rApp Instance with the resource details from rApp package
  2. API user get the rApp instance creation response

Deploy rApp Instance

  1. API user request to deploy rApp instance
  2. rApp Manager fetches the rApp package from file system and fetches the 
    resources mentioned in the rApp instance.
  3. rApp Manager request ACM-R with the necessary details from rApp package to 
    Instantiate ACM instance
  4. rApp Manager gets instantiate ACM instance response
  5. rApp Manager request ACM-R to deploy ACM instance
  6. ACM-R deploys the A1PMS instance if it is configured in the ACM instance
  7. ACM-R gets the A1PMS deployment status
  8. ACM-R deploys the Kserve instance if it is configured in the ACM instance
  9. ACM-R gets the Kserve deployment status
  10. ACM-R deploys the Kubernetes instance if it is configured in the ACM instance
  11. ACM-R gets the Kubernetes deployment status
  12. ACM-R deploys the DME instance if it is configured in the ACM instance
  13. ACM-R gets the DME deployment status
  14. rApp Manager gets ACM deployment status
  15. rApp Manager request SME to create the entities in rApp instance
  16. SME creates the entities provided by rApp Manager
  17. rApp manager get the response of SME entities creation
  18. API user provided with the status of rApp instance deployment. rApp Manager combines 
    the status of ACM deployment and SME deployment to provide the rApp instance status.

Undeploy rApp Instance

  1. API user request to undeploy rApp instance
  2. rApp Manager fetches the rApp and rApp instance details
  3. rApp Manager request ACM-R to undeploy the ACM instance
  4. ACM-R undeploy the A1PMS instance if it is already deployed
  5. ACM-R gets the A1PMS undeploy status
  6. ACM-R undeploy the Kserve instance if it is already deployed
  7. ACM-R gets the Kserve undeploy status
  8. ACM-R undeploy the Kubernetes instance if it is already deployed
  9. ACM-R gets the Kubernetes undeploy status
  10. ACM-R undeploy the DME instance if it is already deployed
  11. ACM-R gets the DME undeploy status
  12. rApp Manager get ACM undeploy status
  13. rApp Manager request ACM-R to delete the ACM instance
  14. rApp Manager get response of ACM instance deletion
  15. rApp Manager request SME to delete SME entities
  16. SME deletes the entities created as part of rApp
  17. rApp Manager get the response of SME entities deletion
  18. API user get the status of undeploy rApp instance

Delete rApp Instance

  1. API user request rApp Manager to delete rApp Instance
  2. API user gets delete rApp instance response




Sample rApp package structure

Warning

This packaging structure is a prototype and subject to change


The sample rApp package structure shown below and the location of relevant files for each integration is provided.


ACM (Files/Acm)

  • Definition - Files/Acm/Definition (Only one file)
  • Instances - Files/Acm/instances

DME (Files/Dme)

  • Consumer Information Types - Files/Dme/consumerinfotypes
  • Producer information Types -  Files/Dme/producerinfotypes
  • Information Consumers - Files/Dme/infoconsumers
  • Information Producers - Files/Dme/infoproducers

SME (Files/Sme)

  • Providers Functions - Files/Sme/providers
  • Service Api -  Files/Sme/serviceapis
  • Invokers - Files/Sme/invokers




CSAR File Generation

CSAR file generator is available in the rAppmanager repository here. 

"rappmanager/csar-generator/resources" folder contains the resources to build the rApp package.

The contents of the "resources" directory can be modified as required and the package can be generated as shown below,

Code Block
languagebash
titleLinux: Generate rApp package
> ./generate.sh


Code Block
languagepowershell
titleWindows: Generate rApp package
> ./generate.bat

This will generate a package named "rapp.csar". It can be renamed as required.

This generated package can be used with rApp Manager to create rApp.

Deployment Instructions

The scripts for the deployments of rApp Manager and its dependent components are available here.

Tip

These scripts are specifically designed for a fresh environment. Some tweaks may be required to run these in an environment where there are some existing installations

Pre-requisites

  • Kubernetes Cluster (V1.24.6)
  • GIT

Installation

All components can be installed using the command below,

Code Block
languagebash
>./install-all.sh


Individual components can be installed using the commands below,

To install the tools required for other installer scripts.

Code Block
languagebash
>./install-base.sh

To install the ACM, and it's related components.

Code Block
languagebash
>./install-acm.sh

To install the Kserve, and it's related components.

Code Block
languagebash
>./install-kserve.sh

To installs the NONRTRIC components.

Code Block
languagebash
>./install-nonrtric.sh

Uninstallation

To uninstall all the components

Code Block
languagebash
>./uninstall-all.sh