Page History

This page describes how to get the release B version of NonRTRIC Non-RT RIC up and running locally with two separate NearRTNear-RT RIC simulator docker containers providing OSC_2.1.0 version of A1 interface.

All four components of the NonRTRIC the Non-RT RIC (from three different repos) run inside docker containers and communicate via a docker network. Details of the architecture can be found from Release B page.

...

To support local test with two separate NearRTNear-RT RIC simulator instances:  

• create a new nonrtric/policy-agent/config/application_configuration.yaml json with the configuration below
• The controller hostname and port values come from and must match those defined in nonrtric/sdnc-a1-controller/oam/installation/src/main/yaml/docker-compose.yml
• any defined ric names must match the given docker container names in nearRTnear-RT RIC simulator startup - port is always the simulator's internal 8085

{
   "config": {
      "//description": "Application configuration",
      "controller": [
         {
            "name": "controller1",
            "baseUrl": "http://a1-controller-container:8181",
            "userName": "admin",
            "password": "Kp8bJ4SXszM0WXlhak3eHlcse2gAw84vaoGGmJvUy2U"
         }
      ],
      "ric": [
         {
            "name": "ric1",
            "baseUrl": "http://brick1ric1:8085/",
            "controller": "controller1",
            "managedElementIds": [
               "kista_1",
               "kista_2"
            ]
         },
                  {
            "name": "ric2",
            "baseUrl": "http://brick2ric2:8085/",
            "controller": "controller1",
            "managedElementIds": [
               "kista_3",
               "kista_4"
            ]
         }
      ]
   }
}

update policy-agent/Dockerfile: 

ADD /config/application_configuration.json /opt/app/policy-agent/data/application_configuration.json_example

to

ADD /config/application_configuration.json /opt/app/policy-agent/data/application_configuration.json

Build the code and create docker images

...

cd a1-interface/near-rt-ric-simulator
docker build -t near-rt-ric-simulator:latest .

Build

...

NONRTRIC / A1 Policy control panel container

Download the nonrtric repo (defaults to master branch): 

     git clone "https://gerrit.o-ran-sc.org/r/portal/nonrtric-controlpanel"

Verify

...

controlpanel configuration

 Note that nonrtric/dashboard-controlpanel/webapp-backend/src/main/resources/application.properties default property value policycontroller.url.prefix = http://policy-agent-container:8081 assumes that policy agent is started with name policy-agent-container and exposes port 8081 (as is done below)! 

...

cd nonrtric-controlpanel
mvn clean install -Dmaven.test.skip=true

Run A1 Controller Docker Container

• A1 Controller must be started first to set up docker network
• Change directory to: 

  cd nonrtric/sdnc-a1-controller/oam/installation/src/main/yaml

• Run docker container using the command below  

  docker-compose up a1-controller

  • the container is ready once message "Healthcheck Passed in XX seconds." appears
  • note that certificate-related errors "cp: can't stat '/opt/opendaylight/current/certs/*': No such file or directory" and "Error: File not found in path entered" can be ignored 
• The Karaf logs of A1 controller can be seen using the following commands: followed e.g. by using command 

  docker exec -it a1-controller-container sh
  cd  -c "tail -f /opt/opendaylight/data/log/
  tail -f karaf.logkaraf.log"

Open Daylight GUI

• For troubleshooting/verification purposes the Open Daylight GUI can be accessed by pointing web-browser to this URL:
  http://localhost:8282/apidoc/explorer/index.html
  Username/password: admin/Kp8bJ4SXszM0WXlhak3eHlcse2gAw84vaoGGmJvUy2U

Run Near-RT

...

RIC A1 Simulator Docker Containers

• Start docker containers for each ric defined in nonrtric/policy-agent/config/application_configuration.yaml  json in previous steps (in this example for ric1 and ric2) and providing A1 interface version OSC_2.1.0 with the following commands:: 

  docker run -p 8085:8085 -p 8185:8185 -e A1_VERSION=OSC_2.1.0 -e ALLOW_HTTP=true --network=nonrtric-docker-net --name=ric1 near-rt-ric-simulator:latest
  docker run -p 8086:8085 -p 8185:8185 -e A1_VERSION=OSC_2.1.0 -e ALLOW_HTTP=true --network=nonrtric-docker-net --name=ric2 near-rt-ric-simulator:latest
  

• Change directory to:  

  cd a1-interface/near-rt-ric-simulator/test/OSC_2.1.0/jsonfiles

• Put an example policy_type into the started near-rt-ric-simulator instances by running these curl commands (in this example to ric1 exposed to port 8085 and ric2 exposed to port 8086):

  curl -X PUT -v "http://localhost:8085/a1-p/policytypes/123" -H "accept: application/json" \
   -H "Content-Type: application/json" --data-binary @pt1.json
  curl -X PUT -v "http://localhost:8086/a1-p/policytypes/123" -H "accept: application/json" \
   -H "Content-Type: application/json" --data-binary @pt1.json

...

• Run docker container using this command once A1 Controller and simulators have been fully started (see note below): 

  docker run -p 8081:8081 --network=nonrtric-docker-net --name=policy-agent-container o-ran-sc/nonrtric-policy-agent:12.0.0-SNAPSHOT
  

...

• Once policy-agent is up and running, it establishes connections to all configured

...

• Near-RT RICs

...

• (Note: In Bronze Maintenance veriosn it will be possible to point docker to use a different configuration file than the version included inside the container - e.g. to add additional near-RT-RICs)
• If policy-agent-container is configured to log at DEBUG level, the following logs should appear to log to show that connection to the configured RICs has been established successfully via A1 Controller.

$ docker logs policy-agent-container | grep "protocol version"
2020-04-17 11:10:11.357 DEBUG 1 --- [or-http-epoll-1] o.o.policyagent.clients.A1ClientFactory  : Established protocol version:SDNC_OSC_OSC_V1 for Ric: ric1
2020-04-17 11:10:11.387 DEBUG 1 --- [or-http-epoll-1] o.o.policyagent.clients.A1ClientFactory  : Established protocol version:SDNC_OSC_OSC_V1 for Ric: ric2

policy-agent Swagger API

For troubleshooting/verification purposes you can view/access the policy-agent swagger API from url: http://localhost:8081/swagger-ui.html

Run Non-RT

...

RIC

...

Control Panel Docker Container

Run docker container using this command: 

docker run -p 8080:8080 --network=nonrtric-docker-net o-ran-sc/nonrtric-controlpanel:12.0.0-SNAPSHOT

Open

...

• Open Daylight GUI can be accessed by pointing web-browser to this URL:
  http://localhost:8282/apidoc/explorer/index.html
  Username/password: admin/Kp8bJ4SXszM0WXlhak3eHlcse2gAw84vaoGGmJvUy2U

...

NONRTRIC / A1 Policy Control Panel UI

Dashboard UI can be accessed by pointing the web-browser to this URL: 

...