Introduction

This design matches the requirements in the following USs:  

RIC-431 - Getting issue details... STATUS

RIC-432 - Getting issue details... STATUS

RIC-433 - Getting issue details... STATUS

RIC-434 - Getting issue details... STATUS

RnibReader Changes

We shall add a new proto message, named AdditionalCellInformation:

message AdditionalCellInformation {
	float cell_latitude = 1;
	float cell_longitude = 2;
	float antenna_height = 3;
	float antenna_azimuth_direction = 4;
	float antenna_tilt_angle = 5;
	float antenna_max_transmit = 6;
	float antenna_max_gain = 7;
	uint32 sector_id = 8;
}
  • Expand ServedCellInfo (enb.proto) with this proto message:

enb.proto
message Enb {
    EnbType enb_type = 1;
    repeated ServedCellInfo served_cells = 2;
    repeated string gu_group_ids = 3;
}

message ServedCellInfo {
	...
	AdditionalCellInformation additional_cell_information = 16;
}
  • Expand ServedNRCellInformation (gnb.proto) with this proto message:

gnb.proto
message Gnb {
    repeated ServedNRCell served_nr_cells = 1;
    repeated RanFunction ran_functions = 2;
}

message ServedNRCell {
    ServedNRCellInformation served_nr_cell_information = 1;
    repeated NrNeighbourInformation nr_neighbour_infos = 2;
}

message ServedNRCellInformation {
	...
	AdditionalCellInformation additional_cell_information = 16;
}

E2 Manager Configuration Changes

Add a new configuration key to the yaml file.

Recently we've added:

stateChangeMessageChannel: RAN_CONNECTION_STATUS_CHANGE

Now we shall add a new channel for RAN changes:

ranManipulationMessageChannel: RAN_MANIPULATION

This key, as others, should be read to the app's configuration which is injected to various flows.

This key will be used by RnibWriter for adding/updating/deleting eNBs and updating gNBs.

RnibWriter will trigger Sdl.SetAndPublish method, sending the RAN_MANIPULATION channel, and one of the following events:

<RAN_NAME>_ADDED
<RAN_NAME>_UPDATED
<RAN_NAME>_DELETED

RnibWriter Changes

  • Modify the following method:

SaveNodeb(nbIdentity *entities.NbIdentity, nodebInfo *entities.NodebInfo) error

→ For Gnb type, we execute sdl's Set method.

→ For Enb type, we execute sdl's SetAndPublish method instead, sending RAN_MANIPULATION channel and <RAN_NAME>_ADDED event.


  • Add the following methods:


RemoveServedCells(inventoryName string, servedCells []*entities.ServedCellInfo) error
UpdateEnb(nodebInfo *entities.NodebInfo, servedCells []*entities.ServedCellInfo) error
DeleteEnb(nodebInfo *entities.NodebInfo) error

I've already added the below method as part of the gNB update cells US (for a case we get an empty list from the client):

RemoveServedNrCells(inventoryName string, servedNrCells []*entities.ServedNRCell) error

Add eNB REST API


Agenda

  • POST /v1/nodeb/enb is triggered, request body is validated
  • Execute GetNodeb with RAN name coming from the request.
    • If we have a DB error or if it already exists → error
  • Create a NodebInfo struct with an Enb configuration, populate it with the request data and set its connection status to DISCONNECTED
  • Execute SaveNodeb, where sdl.SetAndPublish will be triggered for eNB type, sending the RAN_MANIPULATION channel and the <RAN_NAME>_ADDED event.
  • Return 201 CREATED with NodebInfo response.


POST /v1/nodeb/enb

Request Body
{
	"ranName": "",
	"globalNbId": {
					plmnId: "",
					nbId:	""
	},
	"ip": "",
	"port": 1234,
	"enb": {
			"enbType": "",
			"servedCells": [{}],
			"guGroupIds": [""]
	}
}


AddEnbRequestHandler

AddEnbRequestHandler
type AddEnbRequestHandler struct {
	logger 				*logger.Logger		
	rnibDataService		services.RNibDataService
}


Sequence Diagram


Update eNB REST API & Update gNB REST API


Agenda



eNBgNBNotes

PUT /v1/nodeb/enb/<RAN_NAME> is triggered

PUT /v1/nodeb/gnb/<RAN_NAME> is triggered

→ Request body is validated

Execute GetNodeb with RAN name coming from the request

→ If we have a DB error or if it doesn't exist → error

Execute RemoveServedCells to remove the existing eNB cells

Execute RemoveServedNrCells to remove the existing gNB cells


Set the nodeb with the request's data


Execute UpdateEnb

Execute UpdateGnbCells

→ Set cells in both Cell ID key & PCI key

→ Set nodeb in both RAN ID key & RAN NAME key

→ Execute sdl.SetAndPublish, sending the RAN_MANIPULATION channel and the <RAN_NAME>_UPDATED event.

Return 200 OK with NodebInfo response.




PUT /v1/nodeb/enb/<RAN_NAME>PUT /v1/nodeb/gnb/<RAN_NAME>
Request Body
{
	"enb": {
			"enbType": "",
			"servedCells": [{}],
			"guGroupIds": [""]
	}
}
Request Body
{
  "servedNrCells": [
    {
      "servedNrCellInformation": {},
      "nrNeighbourInfos": [{}]
    }
  ]
}



UpdateNodebHandler


Sequence Diagram

Delete eNB REST API


Agenda

  • DELETE /v1/nodeb/enb/<RAN_NAME> is triggered.
  • Execute GetNodeb with RAN name coming from the request.
    • If we have a DB error or if it doesn't exist → error
    • If nodeb is of type gNB → error
  • Execute RemoveEnb 
    • Remove cells from both Cell ID key & PCI key (call RemoveServedCells)
    • Remove nodeb from both RAN ID key & RAN NAME key
    • Remove nbIdentity
    • Execute sdl.SetAndPublish(data,"RAN_MANIPULATION", "<RAN_NAME>_DELETED")
  • Return 204 NO CONTENT response.


DELETE /v1/nodeb/enb/<RAN_NAME>


DeleteEnbRequestHandler
type DeleteEnbRequestHandler struct {
	logger 				*logger.Logger		
	rnibDataService		services.RNibDataService
}


Sequence Diagram

  • No labels