Updated: 17 Nov 2021
JIRA: Epics Status below:
Updates from HCL:
Dependency/Blockers:
Blocked for PTP grandmaster at OSC lab to start the end to end integration activities
Updated: 20 Oct 2021
JIRA: Epics Status below:
Updates from HCL:
Dependency/Blockers:
Blocked for PTP grandmaster at OSC lab to start the end to end integration activities
Updated: 15th Sept 2021
JIRA: Epics Status below:
Updates from HCL:
Dependency/Blockers:
Blocked for PTP grandmaster at OSC lab to start the end to end integration activities
Updated: 7th July 2021
JIRA: Epics Status below:
- https://jira.o-ran-sc.org/browse/ODUHIGH-184 - Done
- As an O-DU L2 developer, I want to implement single UE DL data path and bench-marking
- https://jira.o-ran-sc.org/browse/ODUHIGH-185 - Done
- As an O-DU L2 developer, I want to implement single UE UL data path and bench-marking
- https://jira.o-ran-sc.org/browse/ODUHIGH-186 - WIP
- As an O-DU L2 developer, I want to add support for 64QAM modulation scheme in DL
- Basic code changes complete. Testing in progress for data path
- https://jira.o-ran-sc.org/browse/ODUHIGH-187 - WIP
- As an O-DU L2 developer, I want to add support for 16QAM modulation scheme in UL
- Basic code changes complete. Testing to be done for data path
- https://jira.o-ran-sc.org/browse/ODUHIGH-264 - Done
- As an O-DU L2 developer, I want to add support for Mu1
- Code changes at DU APP completed.
- Resource allocation for SSB to msg5 completed
- Code changes for UE registration flow in progress
- Updates to k0, k1, k2 in progress
- https://jira.o-ran-sc.org/browse/ODUHIGH-265 - Done
- As an O-DU L2 developer, I want to add support for 100 MHz Bandwidth
- Code changes at DU APP completed.
- Resource allocation for SSB to msg5 completed
- Code changes for UE registration flow in progress
- Updates to k0, k1, k2 in progress will be continued in E release
- https://jira.o-ran-sc.org/browse/ODUHIGH-266 - Done
- As an O-DU L2 developer, I want to add support for TDD mode
- Code changes at DU APP completed.
- Resource allocation for SSB to msg5 completed
- Code changes for UE registration flow in progress
- Updates to k0, k1, k2 in progress will be continued in E release (Irrespective of FDD or TDD stack)
- https://jira.o-ran-sc.org/browse/ODUHIGH-299 - Done
- As an O-DU L2 developer, I want to develop O-DU High Layers to support Closed Loop Automation Use-case
- https://jira.o-ran-sc.org/browse/ODUHIGH-267 - Done
- As an O-DU L2 developer, I want to integrate O-DU High with O-DU Low in Radio Mode
- SSB transmission successful
- Debugging issue with Sib1 transmission , PDCCH is received but no PDSCH seen at O-DU low.
- PDSCH for SIB1 is detected at L1 but L1 does not process it. Pointer is to check the PDSCH PDU parameters
- Further debug sessions needed to close the ongoing issues.
- There is no breakthrough even after several debug sessions with O-DU Low
- SIB1 detection at L1 is successful. PHY.XML is updated with removing the hardware accelerator (<dpdkBasebandFecMode> from 1 to 0 to force the SW encoder)
- For the CLA usecase, Cell stop request is received from O-DU high to low but O-DU low sends stop indication multiple times. This issue is fixed in L1 later binary 20.08. This binary update will happen in D-maintenance phase.
- https://jira.o-ran-sc.org/browse/ODUHIGH-268 - Done
- As an O-DU L2 developer, I want to integrate O-DU High with O-CU
- Using Radisys commercial CU as a test fixture
- New VM configured as per H/W and S/W requirements of Radisys CU
- The Network interfaces and CentOS version needs to be revisited for the CU machine. This is achieved with limited OSC lab setup.
- https://jira.o-ran-sc.org/browse/ODUHIGH-269 - Done
- As an O-DU L2 developer, I want to support End to End testing scenarios
- Testing of broadcast messages at O-RU emulator set to begin
- Viavi confirmed receiving at O-RU. Needs verification from UE sim.
- Debug session is planned on 23rd June to achieve SSB and SIB1 transmission till UE simulator and then follow with RACH procedure.
- Latest issue: the eCPRI packets differentiation between control plane and user plane through vlan id is supported by Intel, however O-RU support the packet differentiation based on eCPRI packet type. hence the fronthaul transmission validation is blocked.
- Intel shall update the L1 package supporting C/U plane differentiation using eCPRI packet type in the D-release maintainance phase.
Updates from HCL:
Dependency/Blockers:
- O1 configuration for day-1 shall need to be completed to start with CLA. However basic configuration e.g. cell state/operational state/admin state shall be supported initially. Use admin state as unlocked to validate the RU link failure.
- Server(VM) configuration (H/W and S/W) to mount Radisys CU as a test fixture.
- Unable to use valgrind with Intel libraries. Debugging must be carried out with Alternate methods.
- Intel/Viavi to confirm successful decoding of SSB/SIB1 at UE sim (TM500).
Updated: 30th June 2021
JIRA: Epics Status below:
- https://jira.o-ran-sc.org/browse/ODUHIGH-184 - Done
- As an O-DU L2 developer, I want to implement single UE DL data path and bench-marking
- https://jira.o-ran-sc.org/browse/ODUHIGH-185 - Done
- As an O-DU L2 developer, I want to implement single UE UL data path and bench-marking
- https://jira.o-ran-sc.org/browse/ODUHIGH-186 - WIP
- As an O-DU L2 developer, I want to add support for 64QAM modulation scheme in DL
- Basic code changes complete. Testing in progress for data path
- https://jira.o-ran-sc.org/browse/ODUHIGH-187 - WIP
- As an O-DU L2 developer, I want to add support for 16QAM modulation scheme in UL
- Basic code changes complete. Testing to be done for data path
- https://jira.o-ran-sc.org/browse/ODUHIGH-264 - Done
- As an O-DU L2 developer, I want to add support for Mu1
- Code changes at DU APP completed.
- Resource allocation for SSB to msg5 completed
- Code changes for UE registration flow in progress
- Updates to k0, k1, k2 in progress
- https://jira.o-ran-sc.org/browse/ODUHIGH-265 - Done
- As an O-DU L2 developer, I want to add support for 100 MHz Bandwidth
- Code changes at DU APP completed.
- Resource allocation for SSB to msg5 completed
- Code changes for UE registration flow in progress
- Updates to k0, k1, k2 in progress will be continued in E release
- https://jira.o-ran-sc.org/browse/ODUHIGH-266 - Done
- As an O-DU L2 developer, I want to add support for TDD mode
- Code changes at DU APP completed.
- Resource allocation for SSB to msg5 completed
- Code changes for UE registration flow in progress
- Updates to k0, k1, k2 in progress will be continued in E release (Irrespective of FDD or TDD stack)
- https://jira.o-ran-sc.org/browse/ODUHIGH-299 - Done
- As an O-DU L2 developer, I want to develop O-DU High Layers to support Closed Loop Automation Use-case
- https://jira.o-ran-sc.org/browse/ODUHIGH-267 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-DU Low in Radio Mode
- SSB transmission successful
- Debugging issue with Sib1 transmission , PDCCH is received but no PDSCH seen at O-DU low.
- PDSCH for SIB1 is detected at L1 but L1 does not process it. Pointer is to check the PDSCH PDU parameters
- Further debug sessions needed to close the ongoing issues.
- There is no breakthrough even after several debug sessions with O-DU Low
- SIB1 detection at L1 is successful. PHY.XML is updated with removing the hardware accelerator (<dpdkBasebandFecMode> from 1 to 0 to force the SW encoder)
- For the CLA usecase, Cell stop request is received from O-DU high to low but O-DU low sends stop indication multiple times. This issue is fixed in L1 later binary 20.08. This binary update will happen in D-maintenance phase.
- https://jira.o-ran-sc.org/browse/ODUHIGH-268 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-CU
- Using Radisys commercial CU as a test fixture
- New VM configured as per H/W and S/W requirements of Radisys CU
- The Network interfaces and CentOS version needs to be revisited for the CU machine.
- https://jira.o-ran-sc.org/browse/ODUHIGH-269 - WIP
- As an O-DU L2 developer, I want to support End to End testing scenarios
- Testing of broadcast messages at O-RU emulator set to begin
- Viavi confirmed receiving at O-RU. Needs verification from UE sim.
- Debug session is planned on 23rd June to achieve SSB and SIB1 transmission till UE simulator and then follow with RACH procedure.
- Latest issue: the eCPRI packets differentiation between control plane and user plane through vlan id is supported by Intel, howver O-RU support the packet differentiation based on eCPRI packet type. hence the fronthaul transmission validation is blocked.
Updates from HCL:
Dependency/Blockers:
- O1 configuration for day-1 shall need to be completed to start with CLA. However basic configuration e.g. cell state/operational state/admin state shall be supported initially. Use admin state as unlocked to validate the RU link failure.
- Server(VM) configuration (H/W and S/W) to mount Radisys CU as a test fixture.
- Unable to use valgrind with Intel libraries. Debugging must be carried out with Alternate methods.
- Viavi to confirm successful decoding of SSB/SIB1 at UE sim (TM500).
Updated: 23rd June 2021
JIRA: Epics Status below:
- https://jira.o-ran-sc.org/browse/ODUHIGH-184 - Done
- As an O-DU L2 developer, I want to implement single UE DL data path and bench-marking
- https://jira.o-ran-sc.org/browse/ODUHIGH-185 - Done
- As an O-DU L2 developer, I want to implement single UE UL data path and bench-marking
- https://jira.o-ran-sc.org/browse/ODUHIGH-186 - WIP
- As an O-DU L2 developer, I want to add support for 64QAM modulation scheme in DL
- Basic code changes complete. Testing in progress for data path
- https://jira.o-ran-sc.org/browse/ODUHIGH-187 - WIP
- As an O-DU L2 developer, I want to add support for 16QAM modulation scheme in UL
- Basic code changes complete. Testing to be done for data path
- https://jira.o-ran-sc.org/browse/ODUHIGH-264 - Done
- As an O-DU L2 developer, I want to add support for Mu1
- Code changes at DU APP completed.
- Resource allocation for SSB to msg5 completed
- Code changes for UE registration flow in progress
- Updates to k0, k1, k2 in progress
- https://jira.o-ran-sc.org/browse/ODUHIGH-265 - Done
- As an O-DU L2 developer, I want to add support for 100 MHz Bandwidth
- Code changes at DU APP completed.
- Resource allocation for SSB to msg5 completed
- Code changes for UE registration flow in progress
- Updates to k0, k1, k2 in progress will be continued in E release
- https://jira.o-ran-sc.org/browse/ODUHIGH-266 - Done
- As an O-DU L2 developer, I want to add support for TDD mode
- Code changes at DU APP completed.
- Resource allocation for SSB to msg5 completed
- Code changes for UE registration flow in progress
- Updates to k0, k1, k2 in progress will be continued in E release (Irrespective of FDD or TDD stack)
- https://jira.o-ran-sc.org/browse/ODUHIGH-299 - Done
- As an O-DU L2 developer, I want to develop O-DU High Layers to support Closed Loop Automation Use-case
- https://jira.o-ran-sc.org/browse/ODUHIGH-267 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-DU Low in Radio Mode
- SSB transmission successful
- Debugging issue with Sib1 transmission , PDCCH is received but no PDSCH seen at O-DU low.
- PDSCH for SIB1 is detected at L1 but L1 does not process it. Pointer is to check the PDSCH PDU parameters
- Further debug sessions needed to close the ongoing issues.
- There is no breakthrough even after several debug sessions with O-DU Low
- SIB1 detection at L1 is successful. PHY.XML is updated with removing the hardware accelerator (<dpdkBasebandFecMode> from 1 to 0 to force the SW encoder)
- https://jira.o-ran-sc.org/browse/ODUHIGH-268 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-CU
- Using Radisys commercial CU as a test fixture
- New VM configured as per H/W and S/W requirements of Radisys CU
- The Network interfaces and CentOS version needs to be revisited for the CU machine.
- https://jira.o-ran-sc.org/browse/ODUHIGH-269 - WIP
- As an O-DU L2 developer, I want to support End to End testing scenarios
- Testing of broadcast messages at O-RU emulator set to begin
- Viavi confirmed receiving at O-RU. Needs verification from UE sim.
- Debug session is planned on 23rd June to achieve SSB and SIB1 transmission till UE simulator and then follow with RACH procedure.
Updates from HCL:
Dependency/Blockers:
- O1 configuration for day-1 shall need to be completed to start with CLA. However basic configuration e.g. cell state/operational state/admin state shall be supported initially. Use admin state as unlocked to validate the RU link failure.
- Server(VM) configuration (H/W and S/W) to mount Radisys CU as a test fixture.
- Unable to use valgrind with Intel libraries. Debugging must be carried out with Alternate methods.
- Viavi to confirm successful decoding of SSB/SIB1 at UE sim (TM500).
Updated: 16th June 2021
JIRA: Epics Status below:
- https://jira.o-ran-sc.org/browse/ODUHIGH-184 - Done
- As an O-DU L2 developer, I want to implement single UE DL data path and bench-marking
- https://jira.o-ran-sc.org/browse/ODUHIGH-185 - Done
- As an O-DU L2 developer, I want to implement single UE UL data path and bench-marking
- https://jira.o-ran-sc.org/browse/ODUHIGH-186 - WIP
- As an O-DU L2 developer, I want to add support for 64QAM modulation scheme in DL
- Basic code changes complete. Testing in progress for data path
- https://jira.o-ran-sc.org/browse/ODUHIGH-187 - WIP
- As an O-DU L2 developer, I want to add support for 16QAM modulation scheme in UL
- Basic code changes complete. Testing to be done for data path
- https://jira.o-ran-sc.org/browse/ODUHIGH-264 - WIP
- As an O-DU L2 developer, I want to add support for Mu1
- Code changes at DU APP completed.
- Resource allocation for SSB to msg5 completed
- Code changes for UE registration flow in progress
- Updates to k0, k1, k2 in progress
- https://jira.o-ran-sc.org/browse/ODUHIGH-265 - WIP
- As an O-DU L2 developer, I want to add support for 100 MHz Bandwidth
- Code changes at DU APP completed.
- Resource allocation for SSB to msg5 completed
- Code changes for UE registration flow in progress
- Updates to k0, k1, k2 in progress
- https://jira.o-ran-sc.org/browse/ODUHIGH-266 - WIP
- As an O-DU L2 developer, I want to add support for TDD mode
- Code changes at DU APP completed.
- Resource allocation for SSB to msg5 completed
- Code changes for UE registration flow in progress
- Updates to k0, k1, k2 in progress
- https://jira.o-ran-sc.org/browse/ODUHIGH-299 - WIP
- As an O-DU L2 developer, I want to develop O-DU High Layers to support Closed Loop Automation Use-case
- https://jira.o-ran-sc.org/browse/ODUHIGH-267 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-DU Low in Radio Mode
- SSB transmission successful
- Debugging issue with Sib1 transmission , PDCCH is received but no PDSCH seen at O-DU low.
- PDSCH for SIB1 is detected at L1 but L1 does not process it. Pointer is to check the PDSCH PDU parameters
- Further debug sessions needed to close the ongoing issues.
- There is no breakthrough even after several debug sessions with O-DU Low
- https://jira.o-ran-sc.org/browse/ODUHIGH-268 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-CU
- Using Radisys commercial CU as a test fixture
- New VM configured as per H/W and S/W requirements of Radisys CU
- The Network interfaces and CentOS version needs to be revisited for the CU machine.
- https://jira.o-ran-sc.org/browse/ODUHIGH-269 - WIP
- As an O-DU L2 developer, I want to support End to End testing scenarios
- Testing of broadcast messages at O-RU emulator set to begin
- Viavi confirmed receiving at O-RU. Needs verification from UE sim.
Updates from HCL:
Dependency/Blockers:
- O1 configuration for day-1 shall need to be completed to start with CLA. However basic configuration e.g. cell state/operational state/admin state shall be supported initially. Use admin state as unlocked to validate the RU link failure.
- Server(VM) configuration (H/W and S/W) to mount Radisys CU as a test fixture.
- Unable to use valgrind with Intel libraries. Debugging must be carried out with Alternate methods.
- SIB1 PDSCH is detected at L1 but cannot be processed at L1. Debug sessions to be continued to address this. This is blocker to acheieve radio mode integration.
- Viavi to confirm successful decoding of SSB at UE sim (TM500).
Updated: 9th June 2021
JIRA: Epics Status below:
- https://jira.o-ran-sc.org/browse/ODUHIGH-184 - Done
- As an O-DU L2 developer, I want to implement single UE DL data path and bench-marking
- https://jira.o-ran-sc.org/browse/ODUHIGH-185 - Done
- As an O-DU L2 developer, I want to implement single UE UL data path and bench-marking
- https://jira.o-ran-sc.org/browse/ODUHIGH-186 - WIP
- As an O-DU L2 developer, I want to add support for 64QAM modulation scheme in DL
- Basic code changes complete. Testing in progress for data path
- https://jira.o-ran-sc.org/browse/ODUHIGH-187 - WIP
- As an O-DU L2 developer, I want to add support for 16QAM modulation scheme in UL
- Basic code changes complete. Testing to be done for data path
- https://jira.o-ran-sc.org/browse/ODUHIGH-264 - WIP
- As an O-DU L2 developer, I want to add support for Mu1
- Code changes at DU APP completed.
- Resource allocation for SSB to msg5 completed
- Code changes for UE registration flow in progress
- Updates to k0, k1, k2 in progress
- https://jira.o-ran-sc.org/browse/ODUHIGH-265 - WIP
- As an O-DU L2 developer, I want to add support for 100 MHz Bandwidth
- Code changes at DU APP completed.
- Resource allocation for SSB to msg5 completed
- Code changes for UE registration flow in progress
- Updates to k0, k1, k2 in progress
- https://jira.o-ran-sc.org/browse/ODUHIGH-266 - WIP
- As an O-DU L2 developer, I want to add support for TDD mode
- Code changes at DU APP completed.
- Resource allocation for SSB to msg5 completed
- Code changes for UE registration flow in progress
- Updates to k0, k1, k2 in progress
- https://jira.o-ran-sc.org/browse/ODUHIGH-299 - WIP
- As an O-DU L2 developer, I want to develop O-DU High Layers to support Closed Loop Automation Use-case
- https://jira.o-ran-sc.org/browse/ODUHIGH-267 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-DU Low in Radio Mode
- SSB transmission successful
- Debugging issue with Sib1 transmission , PDCCH is received but no PDSCH seen at O-DU low.
- PDSCH for SIB1 is detected at L1 but L1 does not process it. Pointer is to check the PDSCH PDU parameters
- Further debug sessions needed to close the ongoing issues.
- https://jira.o-ran-sc.org/browse/ODUHIGH-268 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-CU
- Using Radisys commercial CU as a test fixture
- New VM configured as per H/W and S/W requirements of Radisys CU
- The Network interfaces and CentOS version needs to be revisited for the CU machine.
- https://jira.o-ran-sc.org/browse/ODUHIGH-269 - WIP
- As an O-DU L2 developer, I want to support End to End testing scenarios
- Testing of broadcast messages at O-RU emulator set to begin
- Viavi confirmed receiving at O-RU. Needs verification from UE sim.
Updates from HCL:
Dependency/Blockers:
- O1 configuration for day-1 shall need to be completed to start with CLA. However basic configuration e.g. cell state/operational state/admin state shall be supported initially. Use admin state as unlocked to validate the RU link failure.
- Server(VM) configuration (H/W and S/W) to mount Radisys CU as a test fixture.
- Unable to use valgrind with Intel libraries. Debugging must be carried out with Alternate methods.
- SIB1 PDSCH is detected at L1 but cannot be processed at L1. Debug sessions to be continued to address this.
- Viavi to confirm successful decoding of SSB at UE sim (TM500).
Updated: 2nd June 2021
JIRA: Epics Status below:
- https://jira.o-ran-sc.org/browse/ODUHIGH-184 - Done
- As an O-DU L2 developer, I want to implement single UE DL data path and bench-marking
- https://jira.o-ran-sc.org/browse/ODUHIGH-185 - Done
- As an O-DU L2 developer, I want to implement single UE UL data path and bench-marking
- https://jira.o-ran-sc.org/browse/ODUHIGH-186 - WIP
- As an O-DU L2 developer, I want to add support for 64QAM modulation scheme in DL
- Basic code changes complete. Testing in progress for data path
- https://jira.o-ran-sc.org/browse/ODUHIGH-187 - WIP
- As an O-DU L2 developer, I want to add support for 16QAM modulation scheme in UL
- Basic code changes complete. Testing to be done for data path
- https://jira.o-ran-sc.org/browse/ODUHIGH-264 - WIP
- As an O-DU L2 developer, I want to add support for Mu1
- Code changes at DU APP completed.
- Resource allocation for SSB to msg5 completed
- Code changes for UE registration flow in progress
- Updates to k0, k1, k2 in progress
- https://jira.o-ran-sc.org/browse/ODUHIGH-265 - WIP
- As an O-DU L2 developer, I want to add support for 100 MHz Bandwidth
- Code changes at DU APP completed.
- Resource allocation for SSB to msg5 completed
- Code changes for UE registration flow in progress
- Updates to k0, k1, k2 in progress
- https://jira.o-ran-sc.org/browse/ODUHIGH-266 - WIP
- As an O-DU L2 developer, I want to add support for TDD mode
- Code changes at DU APP completed.
- Resource allocation for SSB to msg5 completed
- Code changes for UE registration flow in progress
- Updates to k0, k1, k2 in progress
- https://jira.o-ran-sc.org/browse/ODUHIGH-299 - WIP
- As an O-DU L2 developer, I want to develop O-DU High Layers to support Closed Loop Automation Use-case
- https://jira.o-ran-sc.org/browse/ODUHIGH-267 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-DU Low in Radio Mode
- SSB transmission successful
- Debugging issue with Sib1 transmission , PDCCH is received but no PDSCH seen at O-DU low.
- Awaiting inputs from Intel
- https://jira.o-ran-sc.org/browse/ODUHIGH-268 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-CU
- Using Radisys commercial CU as a test fixture
- New VM to be configured as per H/W and S/W requirements of Radisys CU
- https://jira.o-ran-sc.org/browse/ODUHIGH-269 - WIP
- As an O-DU L2 developer, I want to support End to End testing scenarios
- Testing of broadcast messages at O-RU emulator set to begin
- Viavi confirmed receiving at O-RU. Needs verification from UE sim.
Updates from HCL:
Dependency/Blockers:
- O1 configuration for day-1 shall need to be completed to start with CLA. However basic configuration e.g. cell state/operational state/admin state shall be supported initially. Use admin state as unlocked to validate the RU link failure.
- Server(VM) configuration (H/W and S/W) to mount Radisys CU as a test fixture.
- Unable to use valgrind with Intel libraries. Debugging must be carried out with Alternate methods.
- SIB1 PDSCH reached L1 but cannot be observed in logs. Awaiting response from Intel.
- Viavi to confirm successful decoding of SSB at UE sim (TM500).
Updated: 26th May 2021
JIRA: Epics Status below:
- https://jira.o-ran-sc.org/browse/ODUHIGH-184 - Done
- As an O-DU L2 developer, I want to implement single UE DL data path and bench-marking
- https://jira.o-ran-sc.org/browse/ODUHIGH-185 - Done
- As an O-DU L2 developer, I want to implement single UE UL data path and bench-marking
- https://jira.o-ran-sc.org/browse/ODUHIGH-186 - WIP
- As an O-DU L2 developer, I want to add support for 64QAM modulation scheme in DL
- Basic code changes complete. Testing in progress for data path
- https://jira.o-ran-sc.org/browse/ODUHIGH-187 - WIP
- As an O-DU L2 developer, I want to add support for 16QAM modulation scheme in UL
- Basic code changes complete. Testing to be done for data path
- https://jira.o-ran-sc.org/browse/ODUHIGH-264 - WIP
- As an O-DU L2 developer, I want to add support for Mu1
- Code changes at DU APP completed.
- Resource allocation for SSB and SIB1 completed
- Msg1 to msg4 changes completed.
- Resource table optimization in process
- Reviewing other layers for relevant changes
- Code changes for UE registration flow in progress
- https://jira.o-ran-sc.org/browse/ODUHIGH-265 - WIP
- As an O-DU L2 developer, I want to add support for 100 MHz Bandwidth
- Code changes at DU APP completed.
- Resource allocation for SSB and SIB1 completed
- Msg1 to msg4 changes completed.
- Resource table optimization in process
- Reviewing other layers for relevant changes
- Code changes for UE registration flow in progress
- https://jira.o-ran-sc.org/browse/ODUHIGH-266 - WIP
- As an O-DU L2 developer, I want to add support for TDD mode
- Code changes at DU APP completed.
- Resource allocation for SSB and SIB1 completed
- Msg1 to msg4 changes completed.
- Resource table optimization in process
- Reviewing other layers for relevant changes
- Code changes for UE registration flow in progress
- https://jira.o-ran-sc.org/browse/ODUHIGH-299 - WIP
- As an O-DU L2 developer, I want to develop O-DU High Layers to support Closed Loop Automation Use-case
- Discussions on the O-DU PNF Registration and Activation process is ongoing
- Yang modules to be supported by O-DU to ensure the end-to-end functionality of the use case "Closed loop" is in progress. Basic configuration is agreed to support CLA use case.
- Internal call flow/message sequence between O-CU and O-DU for cell activation and deactivation is clarified.
- UE delete functionality complete
- Cell delete functionality complete
- Issue with mis-coordination between cell delete and DL RRC message, resolved.
- Code changes for CU Interaction under review
- https://jira.o-ran-sc.org/browse/ODUHIGH-267 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-DU Low in Radio Mode
- SSB transmission successful
- Debugging issue with Sib1 transmission , PDCCH is received but no PDSCH seen at O-DU low.
- Awaiting inputs from Intel
- https://jira.o-ran-sc.org/browse/ODUHIGH-268 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-CU
- Using Radisys commercial CU as a test fixture
- New VM to be configured as per H/W and S/W requirements of Radisys CU
- https://jira.o-ran-sc.org/browse/ODUHIGH-269 - WIP
- As an O-DU L2 developer, I want to support End to End testing scenarios
- Testing of broadcast messages at O-RU emulator set to begin
- Awaiting input from Viavi
Updates from HCL:
Dependency/Blockers:
- O1 configuration for day-1 shall need to be completed to start with CLA. However basic configuration e.g. cell state/operational state/admin state shall be supported initially. Use admin state as unlocked to validate the RU link failure.
- Server(VM) configuration (H/W and S/W) to mount Radisys CU as a test fixture.
- Unable to use valgrind with Intel libraries. Debugging must be carried out with Alternate methods.
- SIB1 PDSCH reached L1 but cannot be observed in logs. Awaiting response from Intel.
- SSB reached O-RU. awaiting analysis from Viavi.
Updated: 19th May 2021
JIRA: Epics Status below:
- https://jira.o-ran-sc.org/browse/ODUHIGH-184 - Done
- As an O-DU L2 developer, I want to implement single UE DL data path and bench-marking
- https://jira.o-ran-sc.org/browse/ODUHIGH-185 - Done
- As an O-DU L2 developer, I want to implement single UE UL data path and bench-marking
- https://jira.o-ran-sc.org/browse/ODUHIGH-247 - Done
- As an O-DU L2 developer, I want to Establish Netconf session for O1 interface for CM
- https://jira.o-ran-sc.org/browse/ODUHIGH-297 - Done
- As an O-DU L2 developer, I want to Establish Netconf session for O1 interface for CM
- https://jira.o-ran-sc.org/browse/ODUHIGH-322 - Done
- As an O-DU L2 developer, I want to develop O-DU High Layers to support Closed Loop Automation Use-case
- https://jira.o-ran-sc.org/browse/ODUHIGH-186 - WIP
- As an O-DU L2 developer, I want to add support for 64QAM modulation scheme in DL
- Basic code changes complete. Testing in progress for data path
- https://jira.o-ran-sc.org/browse/ODUHIGH-187 - WIP
- As an O-DU L2 developer, I want to add support for 16QAM modulation scheme in UL
- Basic code changes complete. Testing to be done for data path
- https://jira.o-ran-sc.org/browse/ODUHIGH-264 - WIP
- As an O-DU L2 developer, I want to add support for Mu1
- Code changes at DU APP completed.
- Resource allocation for SSB and SIB1 completed.
- Msg1 to msg4 changes completed.
- Resource table optimization in process
- Reviewing other layers for relevant changes
- https://jira.o-ran-sc.org/browse/ODUHIGH-265 - WIP
- As an O-DU L2 developer, I want to add support for 100 MHz Bandwidth
- Code changes at DU APP completed.
- Resource allocation for SSB and SIB1 completed.
- Msg1 to msg4 changes completed.
- Resource table optimization in process
- Reviewing other layers for relevant changes
- https://jira.o-ran-sc.org/browse/ODUHIGH-266 - WIP
- As an O-DU L2 developer, I want to add support for TDD mode
- Code changes at DU APP completed.
- Resource allocation for SSB and SIB1 completed.
- Msg1 to msg4 changes completed.
- Resource table optimization in process
- Reviewing other layers for relevant changes
- https://jira.o-ran-sc.org/browse/ODUHIGH-299 - WIP
- As an O-DU L2 developer, I want to develop O-DU High Layers to support Closed Loop Automation Use-case
- Discussions on the O-DU PNF Registration and Activation process is ongoing
- Yang modules to be supported by O-DU to ensure the end-to-end functionality of the use case "Closed loop" is in progress. Basic configuration is agreed to support CLA use case.
- Internal call flow/message sequence between O-CU and O-DU for cell activation and deactivation is clarified.
- UE delete functionality complete
- Cell delete functionality complete
- Code changes for CU Interaction under review
- https://jira.o-ran-sc.org/browse/ODUHIGH-267 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-DU Low in Radio Mode
- SSB transmission successful
- Debugging issue with Sib1 transmission , PDCCH is received but no PDSCH seen at O-DU low.
- Awaiting inputs from Intel
- https://jira.o-ran-sc.org/browse/ODUHIGH-268 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-CU
- Using Radisys commercial CU as a test fixture
- New VM to be configured as per H/W and S/Wrequirements of Radisys CU
- https://jira.o-ran-sc.org/browse/ODUHIGH-327 - In review
- As an O-DU L2 developer, I want to develop O-DU High Layers to support Closed Loop Automation Use-case
- https://jira.o-ran-sc.org/browse/ODUHIGH-269 - WIP
- As an O-DU L2 developer, I want to support End to End testing scenarios
- Testing of broadcast messages at O-RU emulator set to begin
- Awaiting input from Viavi
- https://jira.o-ran-sc.org/browse/ODUHIGH-328 - WIP
- As an O-DU L2 developer, I want to develop O-DU High Layers to support Closed Loop Automation Use-case
Dependency/Blockers:
- O1 configuration for day-1 shall need to be completed to start with CLA. However basic configuration e.g. cell state/operational state/admin state shall be supported initially. Use admin state as unlocked to validate the RU link failure.
- Server(VM) configuration (H/W and S/W) to mount Radisys CU as a test fixture.
- Unable to use valgrind with Intel libraries. Debugging must be carried out with Alternate methods.
- SIB1 PDSCH reached L1 but cannot be observed in logs. Awaiting response from Intel.
- SSB reached O-RU. awaiting analysis from Viavi.
Updated: 12th May 2021
JIRA: Epics Status below:
- https://jira.o-ran-sc.org/browse/ODUHIGH-184 - Done
- As an O-DU L2 developer, I want to implement single UE DL data path and bench-marking
- https://jira.o-ran-sc.org/browse/ODUHIGH-185 - Done
- As an O-DU L2 developer, I want to implement single UE UL data path and bench-marking
- https://jira.o-ran-sc.org/browse/ODUHIGH-247 - Done
- As an O-DU L2 developer, I want to Establish Netconf session for O1 interface for CM
- https://jira.o-ran-sc.org/browse/ODUHIGH-297 - Done
- As an O-DU L2 developer, I want to Establish Netconf session for O1 interface for CM
- https://jira.o-ran-sc.org/browse/ODUHIGH-322 - Done
- As an O-DU L2 developer, I want to develop O-DU High Layers to support Closed Loop Automation Use-case
- https://jira.o-ran-sc.org/browse/ODUHIGH-186 - WIP
- As an O-DU L2 developer, I want to add support for 64QAM modulation scheme in DL
- Basic code changes complete. Testing in progress for data path
- https://jira.o-ran-sc.org/browse/ODUHIGH-187 - WIP
- As an O-DU L2 developer, I want to add support for 16QAM modulation scheme in UL
- Basic code changes complete. Testing to be done for data path
- https://jira.o-ran-sc.org/browse/ODUHIGH-264 - WIP
- As an O-DU L2 developer, I want to add support for Mu1
- Code changes at DU APP completed.
- Resource allocation for SSB and SIB1 completed.
- Tracking RACH allocation in review
- Msg 2 to Msg 4 allocation in review
- https://jira.o-ran-sc.org/browse/ODUHIGH-265 - WIP
- As an O-DU L2 developer, I want to add support for 100 MHz Bandwidth
- Code changes at DU APP completed.
- Resource allocation for SSB and SIB1 completed.
- Tracking RACH allocation in review
- Msg 2 to Msg 4 allocation in review
- https://jira.o-ran-sc.org/browse/ODUHIGH-266 - WIP
- As an O-DU L2 developer, I want to add support for TDD mode
- Code changes at DU APP completed.
- Resource allocation for SSB and SIB1 completed.
- Tracking RACH allocation in review
- Msg 2 to Msg 4 allocation in review
- https://jira.o-ran-sc.org/browse/ODUHIGH-299 - WIP
- As an O-DU L2 developer, I want to develop O-DU High Layers to support Closed Loop Automation Use-case
- Discussions on the O-DU PNF Registration and Activation process is ongoing
- Yang modules to be supported by O-DU to ensure the end-to-end functionality of the use case "Closed loop" is in progress. Basic configuration is agreed to support CLA use case.
- Internal call flow/message sequence between O-CU and O-DU for cell activation and deactivation is clarified.
- UE delete functionality complete
- Cell delete functionality complete
- Code changes for CU Interaction under review
- https://jira.o-ran-sc.org/browse/ODUHIGH-267 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-DU Low in Radio Mode
- SSB transmission successful
- Debugging issue with Sib1 transmission , PDCCH is received but no PDSCH seen at O-DU low.
- https://jira.o-ran-sc.org/browse/ODUHIGH-268 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-CU
- Using Radisys commercial CU as a test fixture
- Awaiting server allocation
- https://jira.o-ran-sc.org/browse/ODUHIGH-327 - In review
- As an O-DU L2 developer, I want to develop O-DU High Layers to support Closed Loop Automation Use-case
- https://jira.o-ran-sc.org/browse/ODUHIGH-269 - WIP
- As an O-DU L2 developer, I want to support End to End testing scenarios
- Testing of broadcast messages at O-RU emulator set to begin
- https://jira.o-ran-sc.org/browse/ODUHIGH-328 - TODO
- As an O-DU L2 developer, I want to develop O-DU High Layers to support Closed Loop Automation Use-case
Dependency/Blockers:
- O1 configuration for day-1 shall need to be completed to start with CLA. However basic configuration e.g. cell state/operational state/admin state shall be supported initially. Use admin state as unlocked to validate the RU link failure.
- Server allocation to mount Radisys CU as a test fixture. Bare metal server preferred.
- Unable to use valgrind with Intel libraries. Debugging must be carried out with Alternate methods.
- SIB1 PDSCH reached L1 but cannot be observed in logs. Awaiting response from Intel.
Updated: 28th April 2021
JIRA: Epics Status below:
- https://jira.o-ran-sc.org/browse/ODUHIGH-184 - Done
- As an O-DU L2 developer, I want to implement single UE DL data path and bench-marking
- https://jira.o-ran-sc.org/browse/ODUHIGH-185 - Done
- As an O-DU L2 developer, I want to implement single UE UL data path and bench-marking
- https://jira.o-ran-sc.org/browse/ODUHIGH-186 - WIP
- As an O-DU L2 developer, I want to add support for 64QAM modulation scheme in DL
- Basic code changes complete. Testing in progress for data path
- https://jira.o-ran-sc.org/browse/ODUHIGH-187 - WIP
- As an O-DU L2 developer, I want to add support for 16QAM modulation scheme in UL
- Basic code changes complete. Testing to be done for data path
- https://jira.o-ran-sc.org/browse/ODUHIGH-264 - WIP
- As an O-DU L2 developer, I want to add support for Mu1
- Code changes at DU APP completed.
- Resource allocation for SSB and SIB1 completed.
- RACH allocation in progress
- https://jira.o-ran-sc.org/browse/ODUHIGH-265 - WIP
- As an O-DU L2 developer, I want to add support for 100 MHz Bandwidth
- Code changes at DU APP completed.
- Resource allocation for SSB and SIB1 completed.
- RACH allocation in progress
- https://jira.o-ran-sc.org/browse/ODUHIGH-266 - WIP
- As an O-DU L2 developer, I want to add support for TDD mode
- Code changes at DU APP completed.
- Resource allocation for SSB and SIB1 completed.
- RACH allocation in progress
- https://jira.o-ran-sc.org/browse/ODUHIGH-299 - WIP
- As an O-DU L2 developer, I want to develop O-DU High Layers to support Closed Loop Automation Use-case
- Discussions on the O-DU PNF Registration and Activation process is ongoing
- Yang modules to be supported by O-DU to ensure the end-to-end functionality of the use case "Closed loop" is in progress. Basic configuration is agreed to support CLA use case.
- Internal call flow/message sequence between O-CU and O-DU for cell activation and deactivation is clarified.
- UE delete functionality complete
- Cell delete functionality under review
- Code changes for CU Interaction under review
- https://jira.o-ran-sc.org/browse/ODUHIGH-267 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-DU Low in Radio Mode
- SSB transmission successful
- Debugging issue with Sib1 transmission w,r.t error observed at O-DU Low
- https://jira.o-ran-sc.org/browse/ODUHIGH-268 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-CU
- Using Radisys commercial CU as a test fixture
- Awaiting server allocation
- https://jira.o-ran-sc.org/browse/ODUHIGH-269 - TODO
- As an O-DU L2 developer, I want to support End to End testing scenarios
Dependency/Blockers:
- O1 configuration for day-1 shall need to be completed to start with CLA. However basic configuration e.g. cell state/operational state/admin state shall be supported initially. Use admin state as unlocked to validate the RU link failure.
- Server allocation to mount Radisys CU as a test fixture. Bare metal server preferred.
- Unable to use valgrind with Intel libraries. Debugging must be carried out with Alternate methods.
Updated: 21st April 2021
JIRA: Epics Status below:
- https://jira.o-ran-sc.org/browse/ODUHIGH-184 - Done
- As an O-DU L2 developer, I want to implement single UE DL data path and bench-marking
- https://jira.o-ran-sc.org/browse/ODUHIGH-185 - Done
- As an O-DU L2 developer, I want to implement single UE UL data path and bench-marking
- https://jira.o-ran-sc.org/browse/ODUHIGH-186 - WIP
- As an O-DU L2 developer, I want to add support for 64QAM modulation scheme in DL
- Basic code changes complete. Testing in progress for data path
- https://jira.o-ran-sc.org/browse/ODUHIGH-187 - WIP
- As an O-DU L2 developer, I want to add support for 16QAM modulation scheme in UL
- Basic code changes complete. Testing to be done for data path
- https://jira.o-ran-sc.org/browse/ODUHIGH-264 - WIP
- As an O-DU L2 developer, I want to add support for Mu1
- Code changes at DU APP completed.
- Code changes and testing completed for SSB.
- Resource allocation for SIB1 under review
- https://jira.o-ran-sc.org/browse/ODUHIGH-265 - WIP
- As an O-DU L2 developer, I want to add support for 100 MHz Bandwidth
- Code changes at DU APP completed.
- Code changes and testing completed for SSB.
- Resource allocation for SIB1 under review
- https://jira.o-ran-sc.org/browse/ODUHIGH-266 - WIP
- As an O-DU L2 developer, I want to add support for TDD mode
- Code changes at DU APP completed.
- Code changes and testing completed for SSB.
- Resource allocation for SIB1 under review
- https://jira.o-ran-sc.org/browse/ODUHIGH-299 - WIP
- As an O-DU L2 developer, I want to develop O-DU High Layers to support Closed Loop Automation Use-case
- Discussions on the O-DU PNF Registration and Activation process is ongoing
- Yang modules to be supported by O-DU to ensure the end-to-end functionality of the use case "Closed loop" is in progress. Basic configuration is agreed to support CLA use case.
- Internal call flow/message sequence between O-CU and O-DU for cell activation and deactivation is clarified.
- UE delete functionality under review
- Cell delete functionality under review
- Code changes for CU Interaction in progress
- https://jira.o-ran-sc.org/browse/ODUHIGH-267 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-DU Low in Radio Mode
- SSB transmission successful
- Debugging issue with Sib1 transmission w,r.t symbol allocation/overlapping
- https://jira.o-ran-sc.org/browse/ODUHIGH-268 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-CU
- Using Radisys commercial CU as a test fixture
- Awaiting server allocation
- https://jira.o-ran-sc.org/browse/ODUHIGH-269 - TODO
- As an O-DU L2 developer, I want to support End to End testing scenarios
Dependency/Blockers:
- O1 configuration for day-1 shall need to be completed to start with CLA. However basic configuration e.g. cell state/operational state/admin state shall be supported initially. Use admin state as unlocked to validate the RU link failure.
- Server allocation to mount Radisys CU as a test fixture. Bare metal server preferred.
- Unable to use valgrind with Intel libraries. Debugging issue with seg fault using Brute Force method.
Updated: 14th April 2021
JIRA: Epics Status below:
- https://jira.o-ran-sc.org/browse/ODUHIGH-184 - Done
- As an O-DU L2 developer, I want to implement single UE DL data path and bench-marking
- https://jira.o-ran-sc.org/browse/ODUHIGH-185 - Done
- As an O-DU L2 developer, I want to implement single UE UL data path and bench-marking
- https://jira.o-ran-sc.org/browse/ODUHIGH-186 - WIP
- As an O-DU L2 developer, I want to add support for 64QAM modulation scheme in DL
- Basic code changes complete. Testing in progress for data path
- https://jira.o-ran-sc.org/browse/ODUHIGH-187 - WIP
- As an O-DU L2 developer, I want to add support for 16QAM modulation scheme in UL
- Basic code changes complete. Testing to be done for data path
- https://jira.o-ran-sc.org/browse/ODUHIGH-264 - WIP
- As an O-DU L2 developer, I want to add support for Mu1
- Code changes at DU APP completed.
- Code changes and testing completed for SSB.
- Resource allocation for SIB1 under review
- https://jira.o-ran-sc.org/browse/ODUHIGH-265 - WIP
- As an O-DU L2 developer, I want to add support for 100 MHz Bandwidth
- Code changes at DU APP completed.
- Code changes and testing completed for SSB.
- Resource allocation for SIB1 under review
- https://jira.o-ran-sc.org/browse/ODUHIGH-266 - WIP
- As an O-DU L2 developer, I want to add support for TDD mode
- Code changes at DU APP completed.
- Code changes and testing completed for SSB.
- Resource allocation for SIB1 under review
- https://jira.o-ran-sc.org/browse/ODUHIGH-299 - WIP
- As an O-DU L2 developer, I want to develop O-DU High Layers to support Closed Loop Automation Use-case
- Discussions on the O-DU PNF Registration and Activation process is ongoing
- Yang modules to be supported by O-DU to ensure the end-to-end functionality of the use case "Closed loop" is in progress. Basic configuration is agreed to support CLA use case.
- Internal call flow/message sequence between O-CU and O-DU for cell activation and deactivation is clarifed.
- UE delete functionality under review
- Cell delete functionality under review
- Code changes for CU Interaction in progress
- https://jira.o-ran-sc.org/browse/ODUHIGH-267 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-DU Low in Radio Mode
- SSB transmission successful
- Debugging issue with Sib1 transmission
- https://jira.o-ran-sc.org/browse/ODUHIGH-268 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-CU
- Using Radisys commercial CU as a test fixture
- Awaiting server allocation
- https://jira.o-ran-sc.org/browse/ODUHIGH-269 - TODO
- As an O-DU L2 developer, I want to support End to End testing scenarios
Dependency/Blockers:
- O1 configuration for day-1 shall need to be completed to start with CLA. However basic configuration e.g. cell state/operational state/admin state shall be supported initially.
- Server allocation to mount Radisys CU as a test fixture. Bare metal server preferred.
- Unable to use valgrind with Intel libraries. Debugging issue with seg fault using Brute Force method.
Updated: 7th April 2021
JIRA: Epics Status below:
- https://jira.o-ran-sc.org/browse/ODUHIGH-184 - Done
- As an O-DU L2 developer, I want to implement single UE DL data path and bench-marking
- https://jira.o-ran-sc.org/browse/ODUHIGH-185 - Done
- As an O-DU L2 developer, I want to implement single UE UL data path and bench-marking
- https://jira.o-ran-sc.org/browse/ODUHIGH-186 - WIP
- As an O-DU L2 developer, I want to add support for 64QAM modulation scheme in DL
- Basic code changes complete. Testing in progress for data path
- https://jira.o-ran-sc.org/browse/ODUHIGH-187 - WIP
- As an O-DU L2 developer, I want to add support for 16QAM modulation scheme in UL
- Basic code changes complete. Testing to be done for data path
- https://jira.o-ran-sc.org/browse/ODUHIGH-264 - WIP
- As an O-DU L2 developer, I want to add support for Mu1
- Code changes at DU APP completed.
- Code changes and testing completed for SSB.
- Brainstorming for SIB1 in progress
- https://jira.o-ran-sc.org/browse/ODUHIGH-265 - WIP
- As an O-DU L2 developer, I want to add support for 100 MHz Bandwidth
- Code changes at DU APP completed.
- Code changes and testing completed for SSB.
- Resource allocation design for SIB1 in progress
- https://jira.o-ran-sc.org/browse/ODUHIGH-266 - WIP
- As an O-DU L2 developer, I want to add support for TDD mode
- Code changes at DU APP completed.
- Code changes and testing completed for SSB.
- Resource allocation design for SIB1 in progress
- https://jira.o-ran-sc.org/browse/ODUHIGH-299 - WIP
- As an O-DU L2 developer, I want to develop O-DU High Layers to support Closed Loop Automation Use-case
- Discussions on the O-DU PNF Registration and Activation process is ongoing
- Yang modules to be supported by O-DU to ensure the end-to-end functionality of the use case "Closed loop" is in progress.
- UE delete functionality under review
- Cell delete functionality coding in progress
- https://jira.o-ran-sc.org/browse/ODUHIGH-267 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-DU Low in Radio Mode
- SSB transmission successful
- Debugging issue with Sib1 transmission
- https://jira.o-ran-sc.org/browse/ODUHIGH-268 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-CU
- Using Radisys commercial CU as a test fixture
- Awaiting server allocation
- https://jira.o-ran-sc.org/browse/ODUHIGH-269 - TODO
- As an O-DU L2 developer, I want to support End to End testing scenarios
Dependency/Blockers:
- O1 configuration for day-1 shall need to be completed to start with CLA.
- Server allocation to mount Radisys CU as a test fixture. Bare metal server preferred.
- Unable to use valgrind with Intel libraries. Debugging issue with seg fault using Brute Force method.
Updated: 31st March 2021
JIRA: Epics Status below:
- https://jira.o-ran-sc.org/browse/ODUHIGH-184 - Done
- As an O-DU L2 developer, I want to implement single UE DL data path and bench-marking
- https://jira.o-ran-sc.org/browse/ODUHIGH-185 - Done
- As an O-DU L2 developer, I want to implement single UE UL data path and bench-marking
- https://jira.o-ran-sc.org/browse/ODUHIGH-186 - WIP
- As an O-DU L2 developer, I want to add support for 64QAM modulation scheme in DL
- Basic code changes complete. Testing in progress for data path
- https://jira.o-ran-sc.org/browse/ODUHIGH-187 - WIP
- As an O-DU L2 developer, I want to add support for 16QAM modulation scheme in UL
- Basic code changes complete. Testing to be done for data path
- https://jira.o-ran-sc.org/browse/ODUHIGH-264 - WIP
- As an O-DU L2 developer, I want to add support for Mu1
- Code changes at DU APP completed.
- Code changes and testing completed for SSB.
- Brainstorming for SIB1 in progress
- https://jira.o-ran-sc.org/browse/ODUHIGH-265 - WIP
- As an O-DU L2 developer, I want to add support for 100 MHz Bandwidth
- Code changes at DU APP completed.
- Code changes and testing completed for SSB.
- Resource allocation design for SIB1 in progress
- https://jira.o-ran-sc.org/browse/ODUHIGH-266 - WIP
- As an O-DU L2 developer, I want to add support for TDD mode
- Code changes at DU APP completed.
- Code changes and testing completed for SSB.
- Brainstorming for SIB1 in progress
- https://jira.o-ran-sc.org/browse/ODUHIGH-299 - WIP
- As an O-DU L2 developer, I want to develop O-DU High Layers to support Closed Loop Automation Use-case
- Discussions on the O-DU PNF Registration and Activation process is ongoing
- Yang modules to be supported by O-DU to ensure the end-to-end functionality of the use case "Closed loop" is in progress.
- UE delete functionality under review
- Cell delete functionality coding in progress
- https://jira.o-ran-sc.org/browse/ODUHIGH-267 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-DU Low in Radio Mode
- SSB transmission successful
- Debugging issue with Sib1 transmission
- https://jira.o-ran-sc.org/browse/ODUHIGH-268 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-CU
- Using Radisys commercial CU as a test fixture
- Awaiting server allocation
- https://jira.o-ran-sc.org/browse/ODUHIGH-269 - TODO
- As an O-DU L2 developer, I want to support End to End testing scenarios
Dependency/Blockers:
- O1 configuration for day-1 shall need to be completed to start with CLA.
- Server allocation to mount Radisys CU as a test fixture. Bare metal server preferred.
Updated: 24th March 2021
JIRA: Epics Status below:
- https://jira.o-ran-sc.org/browse/ODUHIGH-184 - Done
- As an O-DU L2 developer, I want to implement single UE DL data path and bench-marking
- https://jira.o-ran-sc.org/browse/ODUHIGH-185 - Done
- As an O-DU L2 developer, I want to implement single UE UL data path and bench-marking
- https://jira.o-ran-sc.org/browse/ODUHIGH-186 - WIP
- As an O-DU L2 developer, I want to add support for 64QAM modulation scheme in DL
- Basic code changes complete. Testing in progress for data path
- https://jira.o-ran-sc.org/browse/ODUHIGH-187 - WIP
- As an O-DU L2 developer, I want to add support for 16QAM modulation scheme in UL
- Basic code changes complete. Testing to be done for data path
- https://jira.o-ran-sc.org/browse/ODUHIGH-264 - WIP
- As an O-DU L2 developer, I want to add support for Mu1
- Code changes at DU APP completed.
- Code changes completed for SSB.
- Brainstorming for SIB1 in progress
- https://jira.o-ran-sc.org/browse/ODUHIGH-265 - WIP
- As an O-DU L2 developer, I want to add support for 100 MHz Bandwidth
- Code changes at DU APP completed.
- Code changes completed for SSB.
- Brainstorming for SIB1 in progress
- https://jira.o-ran-sc.org/browse/ODUHIGH-266 - WIP
- As an O-DU L2 developer, I want to add support for TDD mode
- Code changes at DU APP completed.
- Code changes completed for SSB.
- Brainstorming for SIB1 in progress
- https://jira.o-ran-sc.org/browse/ODUHIGH-299 - WIP
- As an O-DU L2 developer, I want to develop O-DU High Layers to support Closed Loop Automation Use-case
- Discussions on the O-DU PNF Registration and Activation process is ongoing
- Yang modules to be supported by O-DU to ensure the end-to-end functionality of the use case "Closed loop" is in progress.
- Coding changes in progress for UE delete from DU APP to RLC
- UE delete functionality from DU APP to MAC under review
- https://jira.o-ran-sc.org/browse/ODUHIGH-267 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-DU Low in Radio Mode
- SSB testing blocked. Awaiting debug session with Intel
- https://jira.o-ran-sc.org/browse/ODUHIGH-268 - TODO
- As an O-DU L2 developer, I want to integrate O-DU High with O-CU
- https://jira.o-ran-sc.org/browse/ODUHIGH-269 - TODO
- As an O-DU L2 developer, I want to support End to End testing scenarios
Dependency/Blockers:
- O1 configuration for day-1 shall need to be completed to start with CLA.
- SSB integration testing with O-DU Low in Radio mode. Awaiting debug session with Intel.
Updated: 17th March 2021
JIRA: Epics Status below:
- https://jira.o-ran-sc.org/browse/ODUHIGH-184 - Done
- As an O-DU L2 developer, I want to implement single UE DL data path and bench-marking
- https://jira.o-ran-sc.org/browse/ODUHIGH-185 - Done
- As an O-DU L2 developer, I want to implement single UE UL data path and bench-marking
- https://jira.o-ran-sc.org/browse/ODUHIGH-186 - WIP
- As an O-DU L2 developer, I want to add support for 64QAM modulation scheme in DL
- Basic code changes complete. Testing to be done for data path
- https://jira.o-ran-sc.org/browse/ODUHIGH-187 - WIP
- As an O-DU L2 developer, I want to add support for 16QAM modulation scheme in UL
- Basic code changes complete. Testing to be done for data path
- https://jira.o-ran-sc.org/browse/ODUHIGH-264 - WIP
- As an O-DU L2 developer, I want to add support for Mu1
- Code changes at DU APP completed.
- Code changes completed for SSB.
- Resource allocation at SCH in progress.
- https://jira.o-ran-sc.org/browse/ODUHIGH-265 - WIP
- As an O-DU L2 developer, I want to add support for 100 MHz Bandwidth
- Code changes at DU APP completed.
- Code changes completed for SSB.
- Resource allocation at SCH in progress.
- https://jira.o-ran-sc.org/browse/ODUHIGH-266 - WIP
- As an O-DU L2 developer, I want to add support for TDD mode
- Code changes at DU APP completed.
- Resource allocation at SCH in progress for time domain.
- https://jira.o-ran-sc.org/browse/ODUHIGH-299 - WIP
- As an O-DU L2 developer, I want to develop O-DU High Layers to support Closed Loop Automation Use-case
- Discussions on the O-DU PNF Registration and Activation process is ongoing
- Yang modules to be supported by O-DU to ensure the end-to-end functionality of the use case "Closed loop" is in progress.
- Coding changes in progress for UE delete from DU APP to RLC
- https://jira.o-ran-sc.org/browse/ODUHIGH-267 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-DU Low in Radio Mode
- Received slot indications
- Fixed config issues
- SSB testing in progress
- https://jira.o-ran-sc.org/browse/ODUHIGH-268 - TODO
- As an O-DU L2 developer, I want to integrate O-DU High with O-CU
- https://jira.o-ran-sc.org/browse/ODUHIGH-269 - TODO
- As an O-DU L2 developer, I want to support End to End testing scenarios
Dependency/Blockers:
- O1 configuration for day-1 shall need to be completed to start with CLA.
Updated: 10th March 2021
JIRA: Epics Status below:
- https://jira.o-ran-sc.org/browse/ODUHIGH-184 - Done
- As an O-DU L2 developer, I want to implement single UE DL data path and bench-marking
- Code changes have been completed for AM and UM modes
- Testing in progress with a debugging issue of number of packets not being received at DU app.
- https://jira.o-ran-sc.org/browse/ODUHIGH-185 - Done
- As an O-DU L2 developer, I want to implement single UE UL data path and bench-marking
- Code changes have been completed for AM and UM mode
- https://jira.o-ran-sc.org/browse/ODUHIGH-186 - WIP
- As an O-DU L2 developer, I want to add support for 64QAM modulation scheme in DL
- Basic code changes complete. Testing to be done for data path
- https://jira.o-ran-sc.org/browse/ODUHIGH-187 - WIP
- As an O-DU L2 developer, I want to add support for 16QAM modulation scheme in UL
- Basic code changes complete. Testing to be done for data path
- https://jira.o-ran-sc.org/browse/ODUHIGH-264 - WIP
- As an O-DU L2 developer, I want to add support for Mu1
- Code changes at DU APP completed.
- Code changes completed for SSB.
- Resource allocation at SCH in progress.
- https://jira.o-ran-sc.org/browse/ODUHIGH-265 - WIP
- As an O-DU L2 developer, I want to add support for 100 MHz Bandwidth
- Code changes at DU APP completed.
- Code changes completed for SSB.
- Resource allocation at SCH in progress.
- https://jira.o-ran-sc.org/browse/ODUHIGH-266 - WIP
- As an O-DU L2 developer, I want to add support for TDD mode
- Code changes at DU APP completed.
- Resource allocation at SCH in progress for time domain.
- https://jira.o-ran-sc.org/browse/ODUHIGH-299 - WIP
- As an O-DU L2 developer, I want to develop O-DU High Layers to support Closed Loop Automation Use-case
- Discussions on the O-DU PNF Registration and Activation process is ongoing
- Yang modules to be supported by O-DU to ensure the end-to-end functionality of the use case "Closed loop" is in progress.
- https://jira.o-ran-sc.org/browse/ODUHIGH-267 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-DU Low in Radio Mode
- Received slot indications
- SSB testing in progress
- https://jira.o-ran-sc.org/browse/ODUHIGH-268 - TODO
- As an O-DU L2 developer, I want to integrate O-DU High with O-CU
- https://jira.o-ran-sc.org/browse/ODUHIGH-269 - TODO
- As an O-DU L2 developer, I want to support End to End testing scenarios
Dependency/Blockers:
- O1 configuration for day-1 shall need to be completed to start with CLA.
Updated: 03 March 2021
JIRA: Epics Status below:
- https://jira.o-ran-sc.org/browse/ODUHIGH-184 - Done
- As an O-DU L2 developer, I want to implement single UE DL data path and bench-marking
- Code changes have been completed for AM and UM modes
- Testing in progress with a debugging issue of number of packets not being received at DU app.
- https://jira.o-ran-sc.org/browse/ODUHIGH-185 - Done
- As an O-DU L2 developer, I want to implement single UE UL data path and bench-marking
- Code changes have been completed for AM and UM mode
- https://jira.o-ran-sc.org/browse/ODUHIGH-186 - WIP
- As an O-DU L2 developer, I want to add support for 64QAM modulation scheme in DL
- Basic code changes complete. Testing to be done for data path
- https://jira.o-ran-sc.org/browse/ODUHIGH-187 - WIP
- As an O-DU L2 developer, I want to add support for 16QAM modulation scheme in UL
- Basic code changes complete. Testing to be done for data path
- https://jira.o-ran-sc.org/browse/ODUHIGH-264 - WIP
- As an O-DU L2 developer, I want to add support for Mu1
- Code changes at DU APP completed.
- Resource allocation at SCH in progress.
- https://jira.o-ran-sc.org/browse/ODUHIGH-265 - WIP
- As an O-DU L2 developer, I want to add support for 100 MHz Bandwidth
- Code changes at DU APP completed.
- Resource allocation at SCH in progress.
- https://jira.o-ran-sc.org/browse/ODUHIGH-266 - WIP
- As an O-DU L2 developer, I want to add support for TDD mode
- Code changes at DU APP completed.
- Resource allocation at SCH in progress.
- https://jira.o-ran-sc.org/browse/ODUHIGH-299 - WIP
- As an O-DU L2 developer, I want to develop O-DU High Layers to support Closed Loop Automation Use-case
- Discussions on the O-DU PNF Registration and Activation process is ongoing
- https://jira.o-ran-sc.org/browse/ODUHIGH-267 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-DU Low in Radio Mode
- https://jira.o-ran-sc.org/browse/ODUHIGH-268 - TODO
- As an O-DU L2 developer, I want to integrate O-DU High with O-CU
- https://jira.o-ran-sc.org/browse/ODUHIGH-269 - TODO
- As an O-DU L2 developer, I want to support End to End testing scenarios
Dependency/Blockers:
- O1 configuration for day-1 shall need to be completed to start with CLA.
Updated: 24 February 2021
JIRA: Epics Status below:
- https://jira.o-ran-sc.org/browse/ODUHIGH-184 - WIP
- As an O-DU L2 developer, I want to implement single UE DL data path and bench-marking
- Code changes have been completed for AM and UM modes
- Testing in progress with a debugging issue of number of packets not being received at DU app.
- https://jira.o-ran-sc.org/browse/ODUHIGH-185 - Done
- As an O-DU L2 developer, I want to implement single UE UL data path and bench-marking
- Code changes have been completed for AM and UM mode
- https://jira.o-ran-sc.org/browse/ODUHIGH-186 - WIP
- As an O-DU L2 developer, I want to add support for 64QAM modulation scheme in DL
- Basic code changes complete. Testing to be done for data path
- https://jira.o-ran-sc.org/browse/ODUHIGH-187 - WIP
- As an O-DU L2 developer, I want to add support for 16QAM modulation scheme in UL
- Basic code changes complete. Testing to be done for data path
- https://jira.o-ran-sc.org/browse/ODUHIGH-264 - WIP
- As an O-DU L2 developer, I want to add support for Mu1
- Code changes at DU APP completed.
- Resource allocation at SCH in progress.
- https://jira.o-ran-sc.org/browse/ODUHIGH-265 - WIP
- As an O-DU L2 developer, I want to add support for 100 MHz Bandwidth
- Code changes at DU APP completed.
- Resource allocation at SCH in progress.
- https://jira.o-ran-sc.org/browse/ODUHIGH-266 - WIP
- As an O-DU L2 developer, I want to add support for TDD mode
- Code changes at DU APP completed.
- Resource allocation at SCH in progress.
- https://jira.o-ran-sc.org/browse/ODUHIGH-299 - WIP
- As an O-DU L2 developer, I want to develop O-DU High Layers to support Closed Loop Automation Use-case
- Discussions on the O-DU PNF Registration and Activation process is ongoing
- https://jira.o-ran-sc.org/browse/ODUHIGH-267 - TODO
- As an O-DU L2 developer, I want to integrate O-DU High with O-DU Low in Radio Mode
- https://jira.o-ran-sc.org/browse/ODUHIGH-268 - TODO
- As an O-DU L2 developer, I want to integrate O-DU High with O-CU
- https://jira.o-ran-sc.org/browse/ODUHIGH-269 - TODO
- As an O-DU L2 developer, I want to support End to End testing scenarios
Dependency/Blockers:
- O1 configuration for day-1 shall need to be completed to start with CLA.
Updated: 17 February 2021
JIRA: Epics Status below:
- https://jira.o-ran-sc.org/browse/ODUHIGH-184 - WIP
- As an O-DU L2 developer, I want to implement single UE DL data path and bench-marking
- Code changes have been completed for AM and UM modes
- Testing in progress
- https://jira.o-ran-sc.org/browse/ODUHIGH-185 - WIP
- As an O-DU L2 developer, I want to implement single UE UL data path and bench-marking
- Code changes have been completed for AM and UM modes
- Testing in progress
- https://jira.o-ran-sc.org/browse/ODUHIGH-186 - WIP
- As an O-DU L2 developer, I want to add support for 64QAM modulation scheme in DL
- Basic code changes complete. Testing to be done for data path
- https://jira.o-ran-sc.org/browse/ODUHIGH-187 - WIP
- As an O-DU L2 developer, I want to add support for 16QAM modulation scheme in UL
- Basic code changes complete. Testing to be done for data path
- https://jira.o-ran-sc.org/browse/ODUHIGH-264 - WIP
- As an O-DU L2 developer, I want to add support for Mu1
- Code changes at DU APP completed.
- Resource allocation at SCH in progress.
- https://jira.o-ran-sc.org/browse/ODUHIGH-265 - WIP
- As an O-DU L2 developer, I want to add support for 100 MHz Bandwidth
- Code changes at DU APP completed.
- Resource allocation at SCH in progress.
- https://jira.o-ran-sc.org/browse/ODUHIGH-266 - WIP
- As an O-DU L2 developer, I want to add support for TDD mode
- Code changes at DU APP completed.
- Resource allocation at SCH in progress.
- https://jira.o-ran-sc.org/browse/ODUHIGH-299 - WIP
- As an O-DU L2 developer, I want to develop O-DU High Layers to support Closed Loop Automation Use-case
- https://jira.o-ran-sc.org/browse/ODUHIGH-267 - TODO
- As an O-DU L2 developer, I want to integrate O-DU High with O-DU Low in Radio Mode
- https://jira.o-ran-sc.org/browse/ODUHIGH-268 - TODO
- As an O-DU L2 developer, I want to integrate O-DU High with O-CU
- https://jira.o-ran-sc.org/browse/ODUHIGH-269 - TODO
- As an O-DU L2 developer, I want to support End to End testing scenarios
Updated: 16 December 2020
Documentation and release related activities for Cherry release have been completed
Jira: EPICS Status below:
Dependency/Blockers:
- Custom Yang files will be used for Dev activity.
- FAPI files being used provided by INTEL, which is not completely in-line with the latest released version from SCF.
Updated: 9 December 2020
Jira: EPICS Status below:
Dependency/Blockers:
- Custom Yang files will be used for Dev activity.
- FAPI files being used provided by INTEL, which is not completely in-line with the latest released version from SCF.
Updated: 2 December 2020
Jira: EPICS Status below:
Dependency/Blockers:
- Custom Yang files will be used for Dev activity.
- FAPI files being used provided by INTEL, which is not completely in-line with the latest released version from SCF.
Updated: 25 November 2020
Jira: EPICS Status below:
Dependency/Blockers:
- Custom Yang files will be used for Dev activity.
- FAPI files being used provided by INTEL, which is not completely in-line with the latest released version from SCF.
Updated: 18 November 2020
Jira: EPICS Status below:
Dependency/Blockers:
- HCL unable to merge O1 code into master branch.
- Custom Yang files will be used for Dev activity.
- FAPI files being used provided by INTEL, which is not completely in-line with the latest released version from SCF.
Updated: 11 November 2020
Jira: EPICS Status below:
Dependency/Blockers:
- Custom Yang files will be used for Dev activity.
- FAPI files being used provided by INTEL, which is not completely in-line with the latest released version from SCF.
Updated: 4 November 2020
Jira: EPICS Status below:
Dependency/Blockers:
- Custom Yang files will be used for Dev activity but will not be checked-in to public repo.
Updated: 28 October 2020
Jira: EPICS Status below:
Dependency/Blockers:
- 3GPP Yang files will be used for Dev activity but will not be checked-in to public repo.
Updated: 14 October 2020
Jira: EPICS Status below:
Dependency/Blockers:
- in timer mode, Intel expects another prelim msg to be sent from O-DU High before config.REQ. This must be added to O-DU High referring to Intel's test stub(testMac).
- 3GPP Yang files will be used for Dev activity but will not be checked-in to public repo.
Updated: 7 October 2020
Jira: EPICS Status below:
Dependency/Blockers:
- Code committer privileges not enabled for HCL committers yet.
- Memory issues on enabling WLS
- 3GPP Yang files will be used for Dev activity but will not be checked-in to public repo.
Updated: 30 September 2020
Jira: EPICS Status below:
Dependency/Blockers:
- Code committer privileges not enabled for new committers yet.
- Issues with linking O-DU high with O-DU low WLS and DPDK libraries.
- 3GPP Yang files will be used for Dev activity but will not be checked-in to public repo.
Updated: 23 September 2020
Jira: EPICS Status below:
Dependency:
- 3GPP Yang files will be used for Dev activity but will not be checked-in to public repo.
Updated: 16 September 2020
Jira: EPICS Status below:
Dependency:
- Unable to install lib-sctp on Intel server to proceed with compilation.
- 3GPP Yang files will be used for Dev activity but will not be checked-in to public repo.
Updated: 9 September 2020
Jira: EPICS Status below:
Dependency:
- Integration with O-DU Low not started since ATT servers are not accessible.
- 3GPP Yang files will be used for Dev activity but will not be checked-in to public repo.
Updated: 2 September 2020
Jira: EPICS Status below:
Dependency:
- Integration with O-DU Low not started since ATT servers are unavailable
- 3GPP Yang files will be used for Dev activity but will not be checked-in to public repo.
Updated: 26 August 2020
Jira: EPICS Status below:
Blocker:
- Lack of clarity on usage of 3gpp Yang files for CM due to copyright issues
Dependency:
- Integration with O-DU Low not started since ATT servers are unavailable
Updated: 12 August 2020
Jira: EPICS Status below:
Dependency:
- Integration with O-DU Low not started since ATT servers are unavailable
- Clarity on using netconf/VES for alarm notification as part of on-demand Health check
Updated: 13 May 2020
Jira: EPICS Status is mentioned below:
Risks:
- E2SM Specification baseline is still not available while the development is being done using below draft specifications.
- ORAN WG3.E2AP v01.00
- ORAN WG3.E2SM v01.00
- WLS, FAPI interface files baseline - FAPI interface development is dependent on this.
- UE Attach Scenario development - Completed till msg-2,
Status:
Raised 18 change requests in WG8 AAD Specification; Already presented to the WG8 Task groups to be addressed in subsequent releases of the document.
O-DU High layers (MAC, RLC, and app):
- Re-align seed code to 3GPP Release 15.3.0 - Done (completed for all the messages until msg-2)
- Align seed code to WG8 AAD specification and interfaces - MAC - RLC Interface is done, RLC-F1AP interface is partially done (completed for all the data path messages)
- Implementation of cell broadcast procedure and UE attach procedure (SA mode)
for FDD mode and FR1 (Numerology = 0, Bandwidth = 20 MHz) and basic scheduler APIs for single UE and single HARQ transmission- Cell Broadcast procedure - WIP
- UE attach - WIP
F1-U interface development - Done
E2 Traffic Steering implementation based on draft specification - Done (with some limitations due to specifications)
F1-C interface enhancement: Done (procedures identified for bronze released is done)
- Support for following additional F1AP messages:
- Initial UL RRC Message Transfer
- UL/DL RRC Message Transfer
- UE Context Setup Request/Response
- Enhance F1AP messages:
- F1AP Setup Request/Response
- GNB DU Config Update
Basic FAPI messages Implementation - WIP (based on Intel FAPI 1.0.5 version)
Out of Scope:
- Use cases – Traffic Steering, Health Check related messages and call flows
- TDD functionality, NSA
- End to end testing
Limitations/Dependencies:
- FAPI Implementation – Dependency on O-DU Low to open source WLS files, interface files
- Testing: Currently only some unit testing can be done due to lack of test infrastructure i.e UE or UE simulator, O-RU, O-CU, and core components.
===========
Updated: 23 April 2020
Jira: EPICS Status is mentioned below:
Risks:
- E2SM Specification baseline is still not available while the development is being done using below draft specifications.
- ORAN WG3.E2AP v01.00
- ORAN WG3.E2SM v01.00
- WLS, FAPI interface files baseline - FAPI interface development is dependent on this.
- UE Attach Scenario development - Completed till msg-2,
Status:
Raised 18 change requests in WG8 AAD Specification; Already presented to the WG8 Task groups to be addressed in subsequent releases of the document.
O-DU High layers (MAC, RLC, and app):
- Re-align seed code to 3GPP Release 15.3.0 - Done (completed for all the messages until msg-2)
- Align seed code to WG8 AAD specification and interfaces - MAC - RLC Interface is done, RLC-F1AP interface is partially done (completed for all the data path messages)
- Implementation of cell broadcast procedure and UE attach procedure (SA mode)
for FDD mode and FR1 (Numerology = 0, Bandwidth = 20 MHz) and basic scheduler APIs for single UE and single HARQ transmission- Cell Broadcast procedure - WIP
- UE attach - WIP
F1-U interface development - Done
E2 Traffic Steering implementation based on draft specification - Done (with some limitations due to specifications)
F1-C interface enhancement: Done (procedures identified for bronze released is done)
- Support for following additional F1AP messages:
- Initial UL RRC Message Transfer
- UL/DL RRC Message Transfer
- UE Context Setup Request/Response
- Enhance F1AP messages:
- F1AP Setup Request/Response
- GNB DU Config Update
Basic FAPI messages Implementation - WIP (based on Intel FAPI 1.0.5 version)
Out of Scope:
- Use cases – Traffic Steering, Health Check related messages and call flows
- TDD functionality, NSA
- End to end testing
Limitations/Dependencies:
- FAPI Implementation – Dependency on O-DU Low to open source WLS files, interface files
- Testing: Currently only some unit testing can be done due to lack of test infrastructure i.e UE or UE simulator, O-RU, O-CU, and core components.
===========
Updated: 10 April 2020
Risks:
- E2SM Specification baseline is still not available while the development is being done using draft specifications
- WLS, FAPI interface files baseline - FAPI interface development is dependent on this.
- UE Attach Scenario development - in medium risk due to the effort needed to complete the development
Status:
Raised 16 changes in WG8 AAD Specification; working with Ganesh to get them addressed in the next release of the document.
O-DU High layers (MAC, RLC, and app):
- Re-align seed code to 3GPP Release 15.3.0 - WIP
- Align seed code to WG8 AAD specification and interfaces - MAC - RLC Interface is done, RLC-F1AP interface is WIP
- Implementation of cell broadcast procedure and UE attach procedure (SA mode)
for FDD mode and FR1 (Numerology = 0, Bandwidth = 20 MHz) and basic scheduler APIs for single UE and single HARQ transmission- Cell Broadcast procedure - WIP
- UE attach - Open
F1-U interface development - Done
E2 Traffic Steering implementation based on draft specification - Done (with some limitations due to specifications)
F1-C interface enhancement: Done (procedures identified for bronze released is done)
- Support for following additional F1AP messages:
- Initial UL RRC Message Transfer
- UL/DL RRC Message Transfer
- UE Context Setup Request/Response
- Enhance F1AP messages:
- F1AP Setup Request/Response
- GNB DU Config Update
Basic FAPI messages Implementation - Open
Out of Scope:
- Use cases – Traffic Steering, Health Check related messages and call flows
- TDD functionality, NSA
- End to end testing
Limitations/Dependencies:
- FAPI Implementation – Dependency on O-DU Low to open source WLS files, interface files
- Testing: Currently only some unit testing can be done due to lack of test infrastructure i.e UE or UE simulator, O-RU, O-CU, and core components.
======
Updated: 26 March 2020
Risks:
- E2SM Specification baseline is still not available while the development is being done using draft specifications
- WLS, FAPI interface files baseline - FAPI interface development is dependent on this
- UE Attach Scenario development - in medium risk due to the effort needed to complete the development
Status:
O-DU High layers (MAC, RLC, and app):
- Re-align seed code to 3GPP Release 15.3.0
- Align seed code to WG8 AAD specification and interfaces - WIP
- Implementation of cell broadcast procedure and UE attach procedure (SA mode)
for FDD mode and FR1 (Numerology = 0, Bandwidth = 20 MHz) and basic scheduler APIs for single UE and single HARQ transmission
F1-U interface development - WIP
E2 Traffic Steering implementation based on draft specification - WIP
F1-C interface enhancement: Done
- Support for following additional F1AP messages:
- Initial UL RRC Message Transfer
- UL/DL RRC Message Transfer
- UE Context Setup Request/Response
- Enhance F1AP messages:
- F1AP Setup Request/Response
- GNB DU Config Update
Basic FAPI messages Implementation - Open
Out of Scope:
- Use cases – Traffic Steering, Health Check related messages and call flows
- TDD functionality, NSA
- End to end testing
Limitations/Dependencies:
- FAPI Implementation – Dependency on O-DU Low to open source WLS files, interface files
- Testing: Currently only some unit testing can be done due to lack of test infrastructure i.e UE or UE simulator, O-RU, O-CU, and core components.