This page describes how to get the release F version of Non-RT RIC up and running locally with three separate A1 simulator (previously called Near-RT RIC A1 Interface) docker containers providing STD_1.1.3, STD_2.0.0 and OSC_2.1.0 versions of the A1 interface.
All components of the Non-RT RIC run as docker containers and communicate via a private docker network with container ports, ports also available on localhost. Details of the architecture can be found from Release F page.
Docker and docker-compose (latest)
The images used for running the Non-RT RIC can be selected from the table below depending on if the images are built manually (snapshot image) or if release images shall be used.
In general, there is no need to build the images manually unless there are code changes made by the user, so release images should be used. Instruction on how to build all components, see. Release F - Build.
The run commands throughout this page uses the release images and tags. Replace the release images/tags in the container run commands in the instructions if manually-built snapshot images are desired.
Component | Image | Tag |
---|---|---|
A1 Policy Management Service | nexus3.o-ran-sc.org:10002/o-ran-sc/nonrtric-plt-a1policymanagementservice | 2.4.1 |
Information Coordinator Service | nexus3.o-ran-sc.org:10002/o-ran-sc/nonrtric-plt-informationcoordinatorservice | 1.3.1 |
NONRTRIC Control Panel | nexus3.o-ran-sc.org:10002/o-ran-sc/nonrtric-controlpanel | 2.3.0 |
Gateway | nexus3.o-ran-sc.org:10002/o-ran-sc/nonrtric-gateway | 1.0.0 |
A1-Simulator | nexus3.o-ran-sc.org:10002/o-ran-sc/a1-simulator | 2.3.1 |
R-APP Catalogue | nexus3.o-ran-sc.org:10002/o-ran-sc/nonrtric-plt-rappcatalogue | 1.1.0 |
DMaaP Adapter | nexus3.o-ran-sc.org:10002/o-ran-sc/nonrtric-plt-dmaapadapter | 1.1.1 |
DMaaP Mediator | nexus3.o-ran-sc.org:10002/o-ran-sc/nonrtric-plt-dmaapmediatorproducer | 1.1.0 |
Helm Manager | nexus3.o-ran-sc.org:10002/o-ran-sc/nonrtric-plt-helmmanager | 1.2.0 |
Auth Token Fetcher | nexus3.o-ran-sc.org:10002/o-ran-sc/nonrtric-plt-auth-token-fetch | 1.0.0 |
O-DU Slice Assurance | nexus3.o-ran-sc.org:10002/o-ran-sc/nonrtric-rapp-ransliceassurance | 1.1.1 |
O-DU Slice Assurance | nexus3.o-ran-sc.org:10002/o-ran-sc/nonrtric-rapp-ransliceassurance-icsversion | 1.0.0 |
O-RU FH Recovery | nexus3.o-ran-sc.org:10002/o-ran-sc/nonrtric-rapp-orufhrecovery | 1.1.0 |
O-RU FH Recovery | nexus3.o-ran-sc.org:10002/o-ran-sc/nonrtric-rapp-orufhrecovery-consumer | 1.1.0 |
Note: A version of this table appears Integration&Testing - F Release Docker Image List - NONRTRIC (F-Release). This is the authoritative version!
The following ports will be allocated and exposed to localhost for each component. If other port(s) are desired, then the ports need to be replaced in the container run commands in the instructions further below.
Component | Port exposed to localhost (http/https) |
---|---|
A1 Policy Management Service | 8081/8443 |
A1 Simulator (previously called Near-RT RIC A1 Interface) | 8085/8185, 8086/8186, 8087/8187 |
Information Coordinator Service | 8083/8434 |
Non-RT RIC Control Panel | 8080/8880 |
SDNC A1-Controller | 8282/8443 |
Gateway | 9090 (only http) |
App Catalogue Service | 8680/8633 |
Helm Manager | 8112 (only http) |
Dmaap Mediator Producer | 9085/9185 |
Dmaap Adapter Service | 9087/9187 |
The containers need to be connected to docker network in order to communicate with each other.
Create a private docker network. If another network name is used, all references to 'nonrtric-docker-net' in the container run commands below need to be replaced.
docker network create nonrtric-docker-net |
To support local test with three separate A1 simulator (previously called Near-RT RIC A1 Interface) instances, each running a one of the three available A1 Policy interface versions:
The policy management service can be configure with or without a A-Controller. Choose the appropriate configuration below.
This file is for running without the SDNC A1-Controller
{ "config": { "ric": [ { "name": "ric1", "baseUrl": "http://ric1:8085/", "managedElementIds": [ "kista_1", "kista_2" ] }, { "name": "ric2", "baseUrl": "http://ric2:8085/", "managedElementIds": [ "kista_3", "kista_4" ] }, { "name": "ric3", "baseUrl": "http://ric3:8085/", "managedElementIds": [ "kista_5", "kista_6" ] } ] } } |
This file is for running with the SDNC A1-Controller.
{ "config": { "controller": [ { "name": "a1controller", "baseUrl": "https://a1controller:8443", "userName": "admin", "password": "Kp8bJ4SXszM0WXlhak3eHlcse2gAw84vaoGGmJvUy2U" } ], "ric": [ { "name": "ric1", "baseUrl": "http://ric1:8085/", "controller": "a1controller", "managedElementIds": [ "kista_1", "kista_2" ] }, { "name": "ric2", "baseUrl": "http://ric2:8085/", "controller": "a1controller", "managedElementIds": [ "kista_3", "kista_4" ] }, { "name": "ric3", "baseUrl": "http://ric3:8085/", "controller": "a1controller", "managedElementIds": [ "kista_5", "kista_6" ] } ] } } |
To enable the also the optional DMaaP interface, add the following config (same level as the "ric" entry) to application_configuration.json.
Be sure to update http/host/port below to match the configuration of the used message router.
Note: The DMaaP interface for the A1 Policy Management Service is now deprecated |
... "streams_publishes": { "dmaap_publisher": { "type": "message-router", "dmaap_info": { "topic_url": "http://dmaap-mr:3904/events/A1-POLICY-AGENT-WRITE" } } }, "streams_subscribes": { "dmaap_subscriber": { "type": "message-router", "dmaap_info": { "topic_url": "http://dmaap-mr:3904/events/A1-POLICY-AGENT-READ/users/policy-agent?timeout=15000&limit=100" } } }, ... |
Start the container with the following command. Replace "<absolute-path-to-file>" with the the path to the created configuration file in the command. The configuration file is mounted to the container. There will be WARN messages appearing in the log until the simulators are started.
docker run --rm -v <absolute-path-to-file>/application_configuration.json:/opt/app/policy-agent/data/application_configuration.json -p 8081:8081 -p 8433:8433 --network=nonrtric-docker-net --name=policy-agent-container nexus3.o-ran-sc.org:10002/o-ran-sc/nonrtric-plt-a1policymanagementservice:2.4.1 |
Wait 1 minute to allow the container to start and to read the configuration. Then run the command below another terminal. The output should match the configuration in the file - all three rics (ric1, ric2 and ric3) should be included in the output. Note that each ric has the state "UNAVAILABLE" until the simulators are started.
Note: If the policy management service is started with config for the SDNC A1 Controller (the second config option), do the steps described in section Run the A1 Controller Docker Container below before proceeding.
curl localhost:8081/a1-policy/v2/rics |
Expected output (not that all simulators - ric1,ric2 and ric3 will indicate "state":"UNAVAILABLE" until the simulators has been started in Run A1 (previously called Near-RT RIC A1 Interface) Simulator Docker Containers):
{"rics":[{"ric_id":"ric1","managed_element_ids":["kista_1","kista_2"],"policytype_ids":[],"state":"UNAVAILABLE"},{"ric_id":"ric3","managed_element_ids":["kista_5","kista_6"],"policytype_ids":[],"state":"UNAVAILABLE"},{"ric_id":"ric2","managed_element_ids":["kista_3","kista_4"],"policytype_ids":[],"state":"UNAVAILABLE"}]} |
For troubleshooting/verification purposes you can view/access the full swagger API from url: http://localhost:8081/swagger-ui/index.html?configUrl=/v3/api-docs/swagger-config
This step is only applicable if the configuration for the Policy Management Service include the SDNC A1 Controller (second config option), see Run the Policy Management Service Docker Container.
Create the docker compose file - be sure to update image for the a1controller to the one listed for SDNC A1 Controller in the table on the top of this page.
version: '3' networks: default: external: true name: nonrtric-docker-net services: db: image: nexus3.o-ran-sc.org:10001/mariadb:10.5 container_name: sdncdb networks: - default ports: - "3306" environment: - MYSQL_ROOT_PASSWORD=itsASecret - MYSQL_ROOT_HOST=% - MYSQL_USER=sdnctl - MYSQL_PASSWORD=gamma - MYSQL_DATABASE=sdnctl logging: driver: "json-file" options: max-size: "30m" max-file: "5" a1controller: image: nexus3.onap.org:10002/onap/sdnc-image:2.3.2 depends_on : - db container_name: a1controller networks: - default entrypoint: ["/opt/onap/sdnc/bin/startODL.sh"] ports: - 8282:8181 - 8443:8443 links: - db:dbhost - db:sdnctldb01 - db:sdnctldb02 environment: - MYSQL_ROOT_PASSWORD=itsASecret - MYSQL_USER=sdnctl - MYSQL_PASSWORD=gamma - MYSQL_DATABASE=sdnctl - SDNC_CONFIG_DIR=/opt/onap/sdnc/data/properties - SDNC_BIN=/opt/onap/sdnc/bin - ODL_CERT_DIR=/tmp - ODL_ADMIN_USERNAME=admin - ODL_ADMIN_PASSWORD=Kp8bJ4SXszM0WXlhak3eHlcse2gAw84vaoGGmJvUy2U - ODL_USER=admin - ODL_PASSWORD=Kp8bJ4SXszM0WXlhak3eHlcse2gAw84vaoGGmJvUy2U - SDNC_DB_INIT=true - A1_TRUSTSTORE_PASSWORD=a1adapter - AAI_TRUSTSTORE_PASSWORD=changeit logging: driver: "json-file" options: max-size: "30m" max-file: "5" |
Start the SNDC A1 controller with the following command, using the created docker-compose file.
docker-compose up |
Open this url in a web browser to verify that the SDNC A1 Controller is up and running. It may take a few minutes until the url is available.
http://localhost:8282/apidoc/explorer/index.html#/controller%20A1-ADAPTER-API
Username/password: admin/Kp8bJ4SXszM0WXlhak3eHlcse2gAw84vaoGGmJvUy2U
The Karaf logs of A1 controller can be followed e.g. by using command
docker exec a1controller sh -c "tail -f /opt/opendaylight/data/log/karaf.log" |
Start a simulator for each ric defined in in the application_configuration.json created in Run the Policy Management Service Docker Container. Each simulator will use one of the currently available A1 interface versions.
Ric1
docker run --rm -p 8085:8085 -p 8185:8185 -e A1_VERSION=OSC_2.1.0 -e ALLOW_HTTP=true --network=nonrtric-docker-net --name=ric1 nexus3.o-ran-sc.org:10002/o-ran-sc/a1-simulator:2.3.1 |
Ric2
docker run --rm -p 8086:8085 -p 8186:8185 -e A1_VERSION=STD_1.1.3 -e ALLOW_HTTP=true --network=nonrtric-docker-net --name=ric2 nexus3.o-ran-sc.org:10002/o-ran-sc/a1-simulator:2.3.1 |
Ric3
docker run --rm -p 8087:8085 -p 8187:8185 -e A1_VERSION=STD_2.0.0 -e ALLOW_HTTP=true --network=nonrtric-docker-net --name=ric3 nexus3.o-ran-sc.org:10002/o-ran-sc/a1-simulator:2.3.1 |
Wait at least one minute to let the policy management service synchronise the rics. Then run the command below another terminal. The output should match the configuration in the file. Note that each ric now has the state "AVAILABLE".
curl localhost:8081/a1-policy/v2/rics |
Expected output - all state should indicated AVAILABLE:
{"rics":[{"ric_id":"ric1","managed_element_ids":["kista_1","kista_2"],"policytype_ids":[],"state":"AVAILABLE"},{"ric_id":"ric3","managed_element_ids":["kista_5","kista_6"],"policytype_ids":[],"state":"AVAILABLE"},{"ric_id":"ric2","managed_element_ids":["kista_3","kista_4"],"policytype_ids":[""],"state":"AVAILABLE"}]} |
The simulators using version STD_2.0.0 and OSC_2.1.0 supports policy types. Run the commands below to add one policy types in ric1 and ric3.
Create the file with policy type for ric1
{ "name": "pt1", "description": "pt1 policy type", "policy_type_id": 1, "create_schema": { "$schema": "http://json-schema.org/draft-07/schema#", "title": "OSC_PT1_0.1.0", "description": "QoS policy type", "type": "object", "properties": { "scope": { "type": "object", "properties": { "ueId": { "type": "string" }, "qosId": { "type": "string" } }, "additionalProperties": false, "required": [ "ueId", "qosId" ] }, "statement": { "type": "object", "properties": { "priorityLevel": { "type": "number" } }, "additionalProperties": false, "required": [ "priorityLevel" ] } } } } |
Put the policy type to ric1 - should http response code 201
curl -X PUT -v "http://localhost:8085/a1-p/policytypes/123" -H "accept: application/json" \ -H "Content-Type: application/json" --data-binary @osc_pt1.json |
Create the file with policy type for ric3
{ "policySchema": { "$schema": "http://json-schema.org/draft-07/schema#", "title": "STD_QOS_0_2_0", "description": "STD QOS policy type", "type": "object", "properties": { "scope": { "type": "object", "properties": { "ueId": { "type": "string" }, "qosId": { "type": "string" } }, "additionalProperties": false, "required": [ "ueId", "qosId" ] }, "qosObjectives": { "type": "object", "properties": { "priorityLevel": { "type": "number" } }, "additionalProperties": false, "required": [ "priorityLevel" ] } } }, "statusSchema": { "$schema": "http://json-schema.org/draft-07/schema#", "title": "STD_QOS_0.2.0", "description": "STD QOS policy type status", "type": "object", "properties": { "enforceStatus": { "type": "string" }, "enforceReason": { "type": "string" }, "additionalProperties": false, "required": [ "enforceStatus" ] } } } |
Put the policy type to ric3 - should return http response code 201
curl -X PUT -v "http://localhost:8087/policytype?id=std_pt1" -H "accept: application/json" -H "Content-Type: application/json" --data-binary @std_pt1.json |
Wait one minute to let the policy management service synchronise the types with the simulators.
List the synchronised types.
curl localhost:8081/a1-policy/v2/policy-types |
Expected output:
{"policytype_ids":["","123","std_pt1"]} |
Run the following command to start the information coordinator service.
docker run --rm -p 8083:8083 -p 8434:8434 --network=nonrtric-docker-net --name=information-service-container nexus3.o-ran-sc.org:10002/o-ran-sc/nonrtric-plt-informationcoordinatorservice:1.3.1 |
Verify that the Information Coordinator Service is started and responding (response is an empty array).
curl localhost:8083/data-producer/v1/info-types |
Expected output:
[ ] |
For troubleshooting/verification purposes you can view/access the full swagger API from url: http://localhost:8083/swagger-ui/index.html?configUrl=/v3/api-docs/swagger-config
The Gateway exposes the interfaces of the Policy Management Service and the Inform Coordinator Service to a single port of the gateway. This single port is then used by the control panel to access both services.
Create the config file for the gateway.
server: port: 9090 spring: cloud: gateway: httpclient: ssl: useInsecureTrustManager: true wiretap: true httpserver: wiretap: true routes: - id: A1-Policy uri: https://policy-agent-container:8433 predicates: - Path=/a1-policy/** - id: A1-EI-P uri: https://information-service-container:8434 predicates: - Path=/data-producer/** - id: A1-EI-C uri: https://information-service-container:8434 predicates: - Path=/data-consumer/** management: endpoint: gateway: enabled: true endpoints: web: exposure: include: "gateway,loggers,logfile,health,info,metrics,threaddump,heapdump" logging: level: ROOT: ERROR org.springframework: ERROR org.springframework.cloud.gateway: INFO reactor.netty: INFO file: name: /var/log/nonrtric-gateway/application.log |
Run the following command to start the gateway. Replace "<absolute-path-to-file>" with the the path to the created application.yaml.
docker run --rm -v <absolute-path-to-config-file>/application.yaml:/opt/app/nonrtric-gateway/config/application.yaml -p 9090:9090 --network=nonrtric-docker-net --name=nonrtric-gateway nexus3.o-ran-sc.org:10002/o-ran-sc/nonrtric-gateway:1.0.0 |
Run the following two commands to check that the services can be reached through the gateway
curl localhost:9090/a1-policy/v2/rics |
Expected output
{"rics":[{"ric_id":"ric1","managed_element_ids":["kista_1","kista_2"],"policytype_ids":["123"],"state":"AVAILABLE"},{"ric_id":"ric3","managed_element_ids":["kista_5","kista_6"],"policytype_ids":["std_pt1"],"state":"AVAILABLE"},{"ric_id":"ric2","managed_element_ids":["kista_3","kista_4"],"policytype_ids":[""],"state":"AVAILABLE"}]} |
Second command:
curl localhost:9090/data-producer/v1/info-types |
Expected output:
[ ] |
Create the config file for the control panel.
events{} http { include /etc/nginx/mime.types; resolver 127.0.0.11; server { listen 8080; server_name localhost; root /usr/share/nginx/html; index index.html; location /a1-policy/ { set $upstream nonrtric-gateway; proxy_pass http://$upstream:9090; } location /data-producer/ { set $upstream nonrtric-gateway; proxy_pass http://$upstream:9090; } location /data-consumer/ { set $upstream nonrtric-gateway; proxy_pass http://$upstream:9090; } location / { try_files $uri $uri/ /index.html; } } } |
Run the following command to start the control panel. Replace "<absolute-path-to-file>" with the the path to the created nginx.conf.
docker run --rm -v <absolute-path-to-config-file>/nginx.conf:/etc/nginx/nginx.conf -p 8080:8080 --network=nonrtric-docker-net --name=control-panel nexus3.o-ran-sc.org:10002/o-ran-sc/nonrtric-controlpanel:2.3.0 |
The webbased UI can be accessed by pointing the web-browser to this URL:
http://localhost:8080/
Start the App Catalogue Service by the following command.
docker run --rm -p 8680:8680 -p 8633:8633 --network=nonrtric-docker-net --name=rapp-catalogue-service nexus3.o-ran-sc.org:10002/o-ran-sc/nonrtric-plt-rappcatalogue:1.1.0 |
Verify that the service is up and running
curl localhost:8680/services |
Expected output:
[ ] |
Note: Access to kubernetes is required as stated the requirements on the top of this page.
Download the 'helm-manger' repo, Helm Manager.
$ cd helmmanager $ mkdir -p mnt/database $ kubectl create ns chkm |
Start the helm manger in a separate shell by the following command:
docker run \ --rm \ -it \ -p 8112:8083 \ --name helmmanagerservice \ --network nonrtric-docker-net \ -v $(pwd)/mnt/database:/var/helm-manager-service \ -v ~/.kube:/home/nonrtric/.kube \ -v ~/.helm:/home/nonrtric/.helm \ -v ~/.config/helm:/home/nonrtric/.config/helm \ -v ~/.cache/helm:/home/nonrtric/.cache/helm \ -v $(pwd)/config/application.yaml:/etc/app/helm-manager/application.yaml \ nexus3.o-ran-sc.org:10002/o-ran-sc/nonrtric-plt-helmmanager:1.2.0 |
Make sure the app has started by listing the current charts - response should be empty json array.
$ curl http://helmadmin:itisasecret@localhost:8112/helm/charts {"charts":[]} |
To test the app further, start a helm chart repo and create a dummy helm chart
Start a chartmuseum chart repository in a separate shell
$ docker run --rm -it \ -p 8222:8080 \ --name chartmuseum \ --network nonrtric-docker-net \ -e DEBUG=1 \ -e STORAGE=local \ -e STORAGE_LOCAL_ROOTDIR=/charts \ -v $(pwd)/charts:/charts \ ghcr.io/helm/chartmuseum:v0.13.1 |
Add the chart repo to the helm manager by the following command:
$ docker exec -it helmmanagerservice helm repo add cm http://chartmuseum:8080 "cm" has been added to your repositories |
Create a dummy helm chart for test and package the chart, and save this chart in chartmuserum:
$ helm create simple-app Creating simple-app$ helm package simple-appSuccessfully packaged chart and saved it to: <path-in-current-dir>/helm-manager/tmp $ helm package simple-app Successfully packaged chart and saved it to: <path>/simple-app-0.1.0.tgz $ curl --data-binary @simple-app-0.1.0.tgz -X POST http://localhost:8222/api/charts |
The commands below show examples of operations towards the helm manager using the dummy chart.
As an alternative, run the script 'test.sh' to execute a full sequence of commands.
$ ./test.sh docker Start test ================ Get apps - empty ================ curl -sw %{http_code} http://helmadmin:itisasecret@localhost:8112/helm/charts Curl OK Response: 200 Body: {"charts":[]} ================ Add repo ================ curl -sw %{http_code} http://helmadmin:itisasecret@localhost:8112/helm/repo -X POST -H Content-Type:application/json -d @cm-repo.json Curl OK Response: 201 Body: ============ Onboard app =========== curl -sw %{http_code} http://helmadmin:itisasecret@localhost:8112/helm/onboard/chart -X POST -F chart=@simple-app-0.1.0.tgz -F values=@simple-app-values.yaml -F info=<simple-app.json Curl OK Response: 200 Body: ===================== Get apps - simple-app ===================== curl -sw %{http_code} http://helmadmin:itisasecret@localhost:8112/helm/charts Curl OK Response: 200 Body: {"charts":[{"releaseName":"simpleapp","chartId":{"name":"simple-app","version":"0.1.0"},"namespace":"ckhm","repository":{"repoName":"cm","protocol":null,"address":null,"port":null,"userName":null,"password":null},"overrideParams":null}]} =========== Install app =========== curl -sw %{http_code} http://helmadmin:itisasecret@localhost:8112/helm/install -X POST -H Content-Type:application/json -d @simple-app-installation.json Curl OK Response: 201 Body: ===================== Get apps - simple-app ===================== curl -sw %{http_code} http://helmadmin:itisasecret@localhost:8112/helm/charts Curl OK Response: 200 Body: {"charts":[{"releaseName":"simpleapp","chartId":{"name":"simple-app","version":"0.1.0"},"namespace":"ckhm","repository":{"repoName":"cm","protocol":null,"address":null,"port":null,"userName":null,"password":null},"overrideParams":null}]} ================================================================= helm ls to list installed app - simpleapp chart should be visible ================================================================= NAME NAMESPACE REVISION UPDATED STATUS CHART APP VERSION simpleapp ckhm 1 2022-06-27 21:18:27.407666475 +0000 UTC deployed simple-app-0.1.0 1.16.0 ========================================== sleep 30 - give the app some time to start ========================================== ============================ List svc and pod of the app ============================ NAME TYPE CLUSTER-IP EXTERNAL-IP PORT(S) AGE simpleapp-simple-app ClusterIP 10.98.120.189 <none> 80/TCP 30s NAME READY STATUS RESTARTS AGE simpleapp-simple-app-675f44fc99-qsxr6 1/1 Running 0 30s ======================== Uninstall app simple-app ======================== curl -sw %{http_code} http://helmadmin:itisasecret@localhost:8112/helm/uninstall/simple-app/0.1.0 -X DELETE Curl OK Response: 204 Body: =========================================== sleep 30 - give the app some time to remove =========================================== ============================================================ List svc and pod of the app - should be gone or terminating ============================================================ No resources found in ckhm namespace. No resources found in ckhm namespace. ===================== Get apps - simple-app ===================== curl -sw %{http_code} http://helmadmin:itisasecret@localhost:8112/helm/charts Curl OK Response: 200 Body: {"charts":[{"releaseName":"simpleapp","chartId":{"name":"simple-app","version":"0.1.0"},"namespace":"ckhm","repository":{"repoName":"cm","protocol":null,"address":null,"port":null,"userName":null,"password":null},"overrideParams":null}]} ============ Delete chart =========== curl -sw %{http_code} http://helmadmin:itisasecret@localhost:8112/helm/chart/simple-app/0.1.0 -X DELETE Curl OK Response: 204 Body: ================ Get apps - empty ================ curl -sw %{http_code} http://helmadmin:itisasecret@localhost:8112/helm/charts Curl OK Response: 200 Body: {"charts":[]} Test result All tests ok End of test |
To run in the helm manager in kubernetes see this page: Run Helm Manager in kubernetes
The Dmaap Adapter Service needs two configurations files, one for the application specific parameters and one for the types the application supports.
Note that a running Information Coordinator Service is needed for creating jobs and a running message router is needed for receiving data that the job can distribute to the consumer.
In addition, if the data is available on a kafka topic then an instance of a running kafka server is needed.
Create the file application.yaml with content below.
The following parameter need to be configured according to hosts and ports (these setting may need to adjusted to your environment)
spring: profiles: active: prod main: allow-bean-definition-overriding: true aop: auto: false management: endpoints: web: exposure: # Enabling of springboot actuator features. See springboot documentation. include: "loggers,logfile,health,info,metrics,threaddump,heapdump" springdoc: show-actuator: true logging: # Configuration of logging level: ROOT: ERROR org.springframework: ERROR org.springframework.data: ERROR org.springframework.web.reactive.function.client.ExchangeFunctions: ERROR org.oran.dmaapadapter: INFO file: name: /var/log/dmaap-adapter-service/application.log server: # Configuration of the HTTP/REST server. The parameters are defined and handeled by the springboot framework. # See springboot documentation. port : 8435 http-port: 8084 ssl: key-store-type: JKS key-store-password: policy_agent key-store: /opt/app/dmaap-adapter-service/etc/cert/keystore.jks key-password: policy_agent key-alias: policy_agent app: webclient: # Configuration of the trust store used for the HTTP client (outgoing requests) # The file location and the password for the truststore is only relevant if trust-store-used == true # Note that the same keystore as for the server is used. trust-store-used: false trust-store-password: policy_agent trust-store: /opt/app/dmaap-adapter-service/etc/cert/truststore.jks # Configuration of usage of HTTP Proxy for the southbound accesses. # The HTTP proxy (if configured) will only be used for accessing NearRT RIC:s http.proxy-host: http.proxy-port: 0 ics-base-url: https://information-service-container:8434 # Location of the component configuration file. The file will only be used if the Consul database is not used; # configuration from the Consul will override the file. configuration-filepath: /opt/app/dmaap-adapter-service/data/application_configuration.json dmaap-base-url: https://message-router:3905 # The url used to address this component. This is used as a callback url sent to other components. dmaap-adapter-base-url: https://dmaapadapterservice:8435 # KAFKA boostrap server. This is only needed if there are Information Types that uses a kafkaInputTopic kafka: bootstrap-servers: message-router-kafka:9092 |
Create the file application_configuration.json according to one of alternatives below.
application_configuration.json without kafka type
{ "types": [ { "id": "ExampleInformationType", "dmaapTopicUrl": "/events/unauthenticated.dmaapadp.json/dmaapadapterproducer/msgs?timeout=15000&limit=100", "useHttpProxy": false } ] } |
application_configuration.json with kafka type
{ "types": [ { "id": "ExampleInformationType", "dmaapTopicUrl": "/events/unauthenticated.dmaapadp.json/dmaapadapterproducer/msgs?timeout=15000&limit=100", "useHttpProxy": false }, { "id": "ExampleInformationTypeKafka", "kafkaInputTopic": "unauthenticated.dmaapadp_kafka.text", "useHttpProxy": false } ] } |
Start the Dmaap Adapter Service in a separate shell with the following command:
docker run --rm \ -v <absolute-path-to-config-file>/application.yaml:/opt/app/dmaap-adapter-service/config/application.yaml \ -v <absolute-path-to-config-file>/application_configuration.json:/opt/app/dmaap-adapter-service/data/application_configuration.json \ -p 9086:8084 -p 9087:8435 --network=nonrtric-docker-net --name=dmaapadapterservice nexus3.o-ran-sc.org:10002/o-ran-sc/nonrtric-plt-dmaapadapter:1.1.1 |
Setup jobs to produce data according to the types in application_configuration.json
Create a file job1.json with the job definition (replace paths <url-for-jod-data-delivery> and <url-for-jod-status-delivery> to fit your environment:
{ "info_type_id": "ExampleInformationType", "job_result_uri": "<url-for-jod-data-delivery>", "job_owner": "job1owner", "status_notification_uri": "<url-for-jod-status-delivery>", "job_definition": {} } |
Create job1 for type 'ExampleInformationType'
curl -k -X PUT -H Content-Type:application/json https://localhost:8434/data-consumer/v1/info-jobs/job1 --data-binary @job1.json |
Check that the job has been enabled - job accepted by the Dmaap Adapter Service
curl -k https://localhost:8434/A1-EI/v1/eijobs/job1/status {"eiJobStatus":"ENABLED"} |
Data posted on the message router topic unauthenticated.dmaapadp.json will be delivered to the path as specified in the job1.json.
If the kafka type also used, setup a job for that type as well.
Create a file job2.json with the job definition (replace paths <url-for-jod-data-delivery> and <url-for-jod-status-delivery> to fit your enviroment:
{ "info_type_id": "ExampleInformationTypeKafka", "job_result_uri": "<url-for-jod-data-delivery>", "job_owner": "job1owner", "status_notification_uri": "<url-for-jod-status-delivery>", "job_definition": {} } |
Create job2 for type 'ExampleInformationType'
curl -k -X PUT -H Content-Type:application/json https://localhost:8434/data-consumer/v1/info-jobs/job2 --data-binary @job2.json |
Check that the job has been enabled - job accepted by the Dmaap Adapter Service
curl -k https://localhost:8434/A1-EI/v1/eijobs/job2/status {"eiJobStatus":"ENABLED"} |
Data posted on the kafka topic unauthenticated.dmaapadp_kafka.text will be delivered to the path as specified in the job2.json.
The Dmaap Mediator Producer needs one configuration file for the types the application supports.
Note that a running Information Coordinator Service is needed for creating jobs and a running message router is needed for receiving data that the job can distribute to the consumer.
Create the file type_config.json with the content below:
{ "types": [ { "id": "STD_Fault_Messages", "dmaapTopicUrl": "/events/unauthenticated.dmaapmed.json/dmaapmediatorproducer/STD_Fault_Messages?timeout=15000&limit=100" } ] } |
There are a number of environment variables that need to be set when starting the application. See these example settings:
INFO_COORD_ADDR=https://informationservice:8434
DMAAP_MR_ADDR=https://message-router:390
LOG_LEVEL=Debug
INFO_PRODUCER_HOST=https://dmaapmediatorservice
INFO_PRODUCER_PORT=8185
Start the Dmaap Mediator Producer in a separate shell with the following command:
docker run --rm -v \ <absolute-path-to-config-file>/type_config.json:/configs/type_config.json \ -p 8885:8085 -p 8985:8185 --network=nonrtric-docker-net --name=dmaapmediatorservice \ -e "INFO_COORD_ADDR=https://information-service-container:8434" \ -e "DMAAP_MR_ADDR=https://message-router:3905" \ -e "LOG_LEVEL=Debug" \ -e "INFO_PRODUCER_HOST=https://dmaapmediatorservice" \ -e "INFO_PRODUCER_PORT=8185" \ nexus3.o-ran-sc.org:10002/o-ran-sc/nonrtric-plt-dmaapmediatorproducer:1. 1.0 |
Setup jobs to produce data according to the types in type_config.json
Create a file job3.json with the job definition (replace paths <url-for-jod-data-delivery> and <url-for-jod-status-delivery> to fit your environment:
{ "info_type_id": "STD_Fault_Messages", "job_result_uri": "<url-for-job-data-delivery>", "job_owner": "job3owner", "status_notification_uri": "<url-for-job-status-delivery>", "job_definition": {} } |
Create job3 for type 'ExampleInformationType'
curl -X PUT -H Content-Type:application/json https://localhost:8083/data-consumer/v1/info-jobs/job3 --data-binary @job3.json |
Check that the job has been enabled - job accepted by the Dmaap Adapter Service
curl -k https://localhost:8434/A1-EI/v1/eijobs/job3/status {"eiJobStatus":"ENABLED"} |
Data posted on the message router topic unauthenticated.dmaapmed.json will be delivered to the path as specified in the job3.json
Within NON-RT RIC a number of usecase implementations are provided. Follow the links below to see how to run them.