This wiki describes how to deploy the NONRTRIC components within Kubernetes cluster.

Demo Video

Delivery Status

DO NOT EDIT

Only the Integration PTL should edit the delivery status table to track the release validation progress

		OTF	OAM	NONRTRIC	RICP	RICAPP	O-DU	O-CU	Test Result	Notes
Deployment Artifacts	Docker Container
	Helm Charts
	Recipe
E2E Flows	Deployment
	Undeploy
	prepare_data.sh

NONRTRIC Architechture

NONRTRIC composes of four major components,

Control Panel
Policy Management Service
A1 Controller
NearRT RIC Simulator

Refer this page for more details

Introduction to Helm Chart

In Nonrtric we use Helm chart as a packaging manager for kubernetes. Helm chart helps developer to package, configure & deploy the application and services into kubernetes environment.

For more information you could refer to below links,

https://helm.sh/docs/intro/quickstart/

Helm Chart in NONRTRIC

In Release B, the helm chart's are written in IT/Dep repo.

The following picture shows the hierarchy of the nonrtric within IT/Dep repo.

Each components in nonrtric repo are independent chart with common dependency of nonrtric-common. The nonrtric chart acts a parent chart where other charts like a1controller, a1simulator, controlpanel & policymanagemenservice are added as dependencies in it.

The nonrtric-common contains the common template shared across all the nonrtric componenets. The nonrtric-common chart is added as a dependency into all the components (a1controller, a1simulator, controlpanel, policymanagemenservice & nonrtric)

Each component can be built & packaged independently of others and the required version can be deployed by adding the same into requirements.yaml file in nonrtric

Requirements.yaml

dependencies:
  - name: a1controller
    version: ~1.0.0
    repository: "@local"
  - name: a1simulator
    version: ~1.0.1
    repository: "@local"
  - name: controlpanel
    version: ~1.0.0
    repository: "@local"
  - name: policymanagementservice
    version: ~1.0.0
    repository: "@local"
  - name: nonrtric-common
    version: ^1.0.0
    repository: "@local"

The values.yaml file contains the default value of the individual components and it can be overridden with the override yaml file. The default values.yaml,

values.yaml

imagePullPolicy: IfNotPresent
image:
  registry: 'nexus3.o-ran-sc.org:10002/o-ran-sc'
  name: nonrtric-a1-controller
  tag: 1.7.4
replicaCount: 1
service:
  internalPort: 8181
  externalPort: 8282

Packaging & Repo update

All the logic behind the helm packaging & repo update are kept under deploy-nonrtric.sh file. This script crawls through the nonrtric directory and packages all the dependencies charts & copy it to the helm local repo.

deploy-nonrtric

# Package nonrtric-common and serve it using Helm local repo
HELM_HOME=$(helm home)
COMMON_CHART_VERSION=$(cat $ROOT_DIR/../ric-common/Common-Template/helm/nonrtric-common/Chart.yaml | grep version | awk '{print $2}')
helm package -d /tmp $ROOT_DIR/../ric-common/Common-Template/helm/nonrtric-common
cp /tmp/nonrtric-common-$COMMON_CHART_VERSION.tgz $HELM_HOME/repository/local/

You can use the example recipe or your custom recipe file to invoke this script. Call the below command from /dep/bin directory,

run deploy command

root@vm1:~/dep/bin#./deploy-nonrtric -f ../nonrtric/RECIPE_EXAMPLE/example_recipe.yaml

The above command packages nonrtri-common, a1controller,a1simulator, controlpanel & policymanagementservice and add them to the local helm repo which will be served later.

The above command also invokes the install script to do the actual deployment of our components which we cover in Deployment section.

Once you run the deploy command you see the below logs in the console,

deploy log

Successfully packaged chart and saved it to: /tmp/nonrtric-common-1.0.0.tgz
Packaging NONRTRIC components [controlpanel a1controller a1simulator policymanagementservice]
Hang tight while we grab the latest from your chart repositories...
...Successfully got an update from the "local" chart repository
...Successfully got an update from the "stable" chart repository
Update Complete. ⎈Happy Helming!⎈
Error: Unable to move current charts to tmp dir: rename /root/dep/nonrtric/helm/controlpanel/charts /root/dep/nonrtric/helm/controlpanel/tmpcharts: file exists
Error: found in requirements.yaml, but missing in charts/ directory: nonrtric-common
Hang tight while we grab the latest from your chart repositories...
...Successfully got an update from the "local" chart repository
...Successfully got an update from the "stable" chart repository
Update Complete. ⎈Happy Helming!⎈
Saving 1 charts
Downloading nonrtric-common from repo http://127.0.0.1:8879/charts
Deleting outdated charts
Successfully packaged chart and saved it to: /tmp/a1controller-1.0.0.tgz
Hang tight while we grab the latest from your chart repositories...
...Successfully got an update from the "local" chart repository
...Successfully got an update from the "stable" chart repository
Update Complete. ⎈Happy Helming!⎈
Saving 1 charts
Downloading nonrtric-common from repo http://127.0.0.1:8879/charts
Deleting outdated charts
Successfully packaged chart and saved it to: /tmp/a1simulator-1.0.1.tgz
Hang tight while we grab the latest from your chart repositories...
...Successfully got an update from the "local" chart repository
...Successfully got an update from the "stable" chart repository
Update Complete. ⎈Happy Helming!⎈
Saving 1 charts
Downloading nonrtric-common from repo http://127.0.0.1:8879/charts
Deleting outdated charts
Successfully packaged chart and saved it to: /tmp/policymanagementservice-1.0.0.tgz
"local" has been removed from your repositories
"local" has been added to your repositories
Finished Packaging NONRTRIC components [controlpanel a1controller a1simulator policymanagementservice]

Deployment

This is where the actual deployment of the components into kubernetes cluster happens. The install script is responsible for identifying the namespace, helm release & parent chart to start the deployment process. It also creates the config map of the recipe file which is later used during uninstall process. Once all the above are done, it will call the below command to deploy the nonrtric components,

install

helm install $DIR/../helm/"${PARENT_CHART}" -f $OVERRIDEYAML --namespace "${NONRTRIC_NAMESPACE:-nonrtric}" --name "${RELEASE_PREFIX}"

The deploy-nonrtric script is called only the first time and every other redeployment should call install script as long as you don't do any change in helm charts. This saves time and resource as we reuse the existing charts packaged and served by helm repo.

To deploy the nonrtric components in kubernetes you need to call the below command from bin directory within nonrtric,

run install command

root@vm1:~/dep/nonrtric/bin#./install -f ../RECIPE_EXAMPLE/example_recipe.yaml

Once the deployment starts you see the below log in console,

Install log

Chart name- nonrtric
namespace/nonrtric created
configmap/nonrtric-recipe created
Deploying NONRTRIC components [controlpanel a1controller a1simulator policymanagementservice nonrtric]
Updating the Parent Chart [nonrtric]
Hang tight while we grab the latest from your chart repositories...
...Successfully got an update from the "local" chart repository
...Successfully got an update from the "stable" chart repository
Update Complete. ⎈Happy Helming!⎈
Saving 5 charts
Downloading a1controller from repo http://127.0.0.1:8879/charts
Downloading a1simulator from repo http://127.0.0.1:8879/charts
Downloading controlpanel from repo http://127.0.0.1:8879/charts
Downloading policymanagementservice from repo http://127.0.0.1:8879/charts
Downloading nonrtric-common from repo http://127.0.0.1:8879/charts
Deleting outdated charts
NAME:   r2-dev-nonrtric
LAST DEPLOYED: Tue Apr 21 10:43:46 2020
NAMESPACE: nonrtric
STATUS: DEPLOYED

RESOURCES:
==> v1/ConfigMap
NAME                               DATA  AGE
controlpanel-configmap             1     1s
policymanagementservice-configmap  1     1s

==> v1/Service
NAME                     TYPE       CLUSTER-IP    EXTERNAL-IP  PORT(S)         AGE
a1controller             ClusterIP  10.43.34.119  <none>       8282/TCP        1s
dbhost                   ClusterIP  10.43.30.35   <none>       3306/TCP        1s
sdnctldb01               ClusterIP  10.43.89.176  <none>       3306/TCP        1s
a1-sim                   ClusterIP  None          <none>       8085/TCP        1s
controlpanel             NodePort   10.43.8.241   <none>       8080:30090/TCP  1s
policymanagementservice  NodePort   10.43.79.184  <none>       8081:30092/TCP  1s

==> v1/Deployment
NAME                     DESIRED  CURRENT  UP-TO-DATE  AVAILABLE  AGE
a1controller             1        1        1           0          1s
db                       1        1        1           0          1s
controlpanel             1        1        1           0          1s
policymanagementservice  1        1        1           0          1s

==> v1/StatefulSet
NAME        DESIRED  CURRENT  AGE
a1-sim-osc  2        1        1s
a1-sim-std  2        1        1s

==> v1/Pod(related)
NAME                                      READY  STATUS             RESTARTS  AGE
a1controller-5c9f5b586c-wktgg             0/1    ContainerCreating  0         1s
db-549ff9b4d5-9skl5                       0/1    ContainerCreating  0         1s
controlpanel-5f4ccc78cb-lc97c             0/1    ContainerCreating  0         1s
policymanagementservice-79d5cdb475-lkhcn  0/1    ContainerCreating  0         1s
a1-sim-osc-0                              0/1    ContainerCreating  0         1s
a1-sim-std-0                              0/1    ContainerCreating  0         0s

Kubernetes Command

Once the above process completes without any error, you can check the status of all pod, services, deployments with below commands,

Get Pods

kubectl -n nonrtric get pod

NAME                                       READY   STATUS    RESTARTS   AGE
a1-sim-osc-0                               1/1     Running   0          150m
a1-sim-osc-1                               1/1     Running   0          150m
a1-sim-std-0                               1/1     Running   0          150m
a1-sim-std-1                               1/1     Running   0          150m
a1controller-5c9f5b586c-wktgg              1/1     Running   0          150m
controlpanel-5f4ccc78cb-lc97c              1/1     Running   0          150m
db-549ff9b4d5-9skl5                        1/1     Running   0          150m
policymanagementservice-79d5cdb475-lkhcn   1/1     Running   0          150m

Get Services

kubectl -n nonrtric get services

NAME                      TYPE        CLUSTER-IP     EXTERNAL-IP   PORT(S)          AGE
a1-sim                    ClusterIP   None           <none>        8085/TCP         155m
a1controller              ClusterIP   10.43.34.119   <none>        8282/TCP         155m
controlpanel              NodePort    10.43.8.241    <none>        8080:30090/TCP   155m
dbhost                    ClusterIP   10.43.30.35    <none>        3306/TCP         155m
policymanagementservice   NodePort    10.43.79.184   <none>        8081:30092/TCP   155m
sdnctldb01                ClusterIP   10.43.89.176   <none>        3306/TCP         155m

Show all results

Space shortcuts

Page tree

Demo Video

Delivery Status

NONRTRIC Architechture

Introduction to Helm Chart

Helm Chart in NONRTRIC

Packaging & Repo update

Deployment

Kubernetes Command

Space shortcuts

Page tree

Deploy NONRTRIC in Kubernetes

Demo Video

Delivery Status

NONRTRIC Architechture

Introduction to Helm Chart

Helm Chart in NONRTRIC

Packaging & Repo update

Deployment

Kubernetes Command