...

The run commands throughout this page uses the release images and tags. Replace the release images/tags in the container run commands in the instructions if manually-built snapshot images are desired. 

...

F Maintenance Release images

(*) Note: For images not released in F (components marked with *) the snap shot images built manually will get an image tag of one step above the release imaged tag. Note: A version of this table appears Integration&Testing - F Release Docker Image List - NONRTRIC (F-Release). This is the authoritive authoritative version! 

Ports

The following ports will be allocated and exposed to localhost for each component. If other port(s) are desired, then the ports need to be replaced in the container run commands in the instructions further below.

...

...

To enable the also the optional DMAAP DMaaP interface, add the following config (same level as the "ric" entry) to application_configuration.json.

Be sure to update http/host/port below to match the configuration of the used message router.

Note: The DMaaP interface for the A1 Policy Management Service is now deprecated

  ...
  "streams_publishes": {
    "dmaap_publisher": {
      "type": "message-router",
      "dmaap_info": {
        "topic_url": "http://dmaap-mr:3904/events/A1-POLICY-AGENT-WRITE"
      }
    }
  },
  "streams_subscribes": {
    "dmaap_subscriber": {
      "type": "message-router",
      "dmaap_info": {
        "topic_url": "http://dmaap-mr:3904/events/A1-POLICY-AGENT-READ/users/policy-agent?timeout=15000&limit=100"
      }
    }
  },
  ...

...

docker run --rm -v <absolute-path-to-file>/application_configuration.json:/opt/app/policy-agent/data/application_configuration.json -p 8081:8081 -p 8433:8433 --network=nonrtric-docker-net --name=policy-agent-container nexus3.o-ran-sc.org:10002/o-ran-sc/nonrtric-plt-a1policymanagementservice:2.4.01

Wait 1 minute to allow the container to start and to read the configuration. Then run the command below another terminal. The output should match the configuration in the file - all three rics (ric1, ric2 and ric3) should be included in the output. Note that each ric has the state "UNAVAILABLE" until the simulators are started.

...

Expected output (not that all simulators - ric1,ric2 and ric3 will indicate "state":"UNAVAILABLE" until the simulators has been started in Run the A1 (previously called Near-RT RIC A1 Interface) Simulator Docker Containers):

...

docker run --rm -p 8085:8085 -p 8185:8185 -e A1_VERSION=OSC_2.1.0 -e ALLOW_HTTP=true --network=nonrtric-docker-net --name=ric1 nexus3.o-ran-sc.org:10002/o-ran-sc/a1-simulator:2.3.01

Ric2

docker run --rm -p 8086:8085 -p 8186:8185 -e A1_VERSION=STD_1.1.3 -e ALLOW_HTTP=true --network=nonrtric-docker-net --name=ric2 nexus3.o-ran-sc.org:10002/o-ran-sc/a1-simulator:2.3.01

Ric3

docker run --rm -p 8087:8085 -p 8187:8185 -e A1_VERSION=STD_2.0.0 -e ALLOW_HTTP=true --network=nonrtric-docker-net --name=ric3 nexus3.o-ran-sc.org:10002/o-ran-sc/a1-simulator:2.3.01

Wait at least one minute to let the policy management service synchronise the rics. Then run the command below another terminal. The output should match the configuration in the file. Note that each ric now has the state "AVAILABLE".

...

docker run --rm -p 8083:8083 -p 8434:8434 --network=nonrtric-docker-net --name=information-service-container nexus3.o-ran-sc.org:10002/o-ran-sc/nonrtric-plt-informationcoordinatorservice:1.3.01

Verify that the Information Coordinator Service is started and responding (response is an empty array).

...

docker run --rm -v <absolute-path-to-config-file>/application.yaml:/opt/app/nonrtric-gateway/config/application.yaml -p 9090:9090 --network=nonrtric-docker-net --name=nonrtric-gateway  nexus3.o-ran-sc.org:10002/o-ran-sc/nonrtric-gateway:1.10.0

Run the following two commands to check that the services can be reached through the gateway

...

docker run --rm \
-v <absolute-path-to-config-file>/application.yaml:/opt/app/dmaap-adapter-service/config/application.yaml \
-v <absolute-path-to-config-file>/application_configuration.json:/opt/app/dmaap-adapter-service/data/application_configuration.json \
-p 9086:8084 -p 9087:8435 --network=nonrtric-docker-net --name=dmaapadapterservice  nexus3.o-ran-sc.org:10002/o-ran-sc/nonrtric-plt-dmaapadapter:1.1.01

Setup jobs to produce data according to the types in application_configuration.json

...

docker run --rm -v \
<absolute-path-to-config-file>/type_config.json:/configs/type_config.json \
-p 8885:8085 -p 8985:8185 --network=nonrtric-docker-net --name=dmaapmediatorservice \
-e "INFO_COORD_ADDR=https://information-service-container:8434" \
-e "DMAAP_MR_ADDR=https://message-router:3905" \
-e "LOG_LEVEL=Debug" \
-e "INFO_PRODUCER_HOST=https://dmaapmediatorservice" \
-e "INFO_PRODUCER_PORT=8185" \
nexus3.o-ran-sc.org:10002/o-ran-sc/nonrtric-plt-dmaapmediatorproducer:1.
1.0

Setup jobs to produce data according to the types in type_config.json

...