O-DU High and Low Integration

This page describes O-DU High/Low pairwise testing procedure in Timer mode.

Demo Video

Delivery Status

1. Cloning O-DU High code

   mkdir odu_high
   cd odu_high
   git clone "https://gerrit.o-ran-sc.org/r/o-du/l2"

2. Cloning O-DU Low code

   mkdir odu_low
   cd odu_low
   - git clone "https://gerrit.o-ran-sc.org/r/o-du/phy"
   - Download code from "https://github.com/intel/FlexRAN"
   
   

3. Install O-DU High pre-requisite libraries by following https://docs.o-ran-sc.org/projects/o-ran-sc-o-du-l2/en/latest/installation-guide.html .
4. Install O-DU Low by following https://docs.o-ran-sc.org/projects/o-ran-sc-o-du-phy/en/latest/index.html .

5. Compilation Preparation

   mkdir odu_high/l2/src/wls_lib
   mkdir odu_high/l2/src/dpdk_lib
   
   cp odu_low/phy/wls_lib/wls_lib.h odu_high/l2/src/wls_lib/
   cp odu_low/dpdk-19.11/x86_64-native-linuxapp-gcc/include/rte_* odu_high/l2/src/dpdk_lib/

   DPDK library

   O-DU low instructs to build DPDK using x86_64-native-linuxapp-icc

   O-DU high uses x86_64-native-linuxapp-gcc, or library will be missing.

6. Compilation

   cd odu_high/l2/build/odu
   make odu PHY=INTEL_L1 PHY_MODE=TIMER MACHINE=BIT64 MODE=FDD

   Hardcoded Library Location

   The makefile of odu assumes the required libraries is located at /opt/intel
   Modification of the makefile is needed if the libraries are located at different location. 

7. Execution - Bringing up L1 of O-DU Low

   cd odu_low/phy
   source ./setupenv.sh
   cd odu_low/FlexRAN/l1/bin/nr5g/gnb/l1
   ./l1.sh -e
   
   Non BBU threads in application
   ===========================================================================================================
   nr5g_gnb_phy2mac_api_proc_stats_thread: [PID:   8659] binding on [CPU  0] [PRIO:  0] [POLICY:  1]
   wls_rx_handler (non-rt):                [PID:   8663] binding on [CPU  0]
   ===========================================================================================================
   
   PHY>welcome to application console
   
   

   Dynamic Library Path

   May need to include the paths to the following libraries in the environment variable LD_LIBRARY_PATH

   ./odu_low/FlexRAN/libs/cpa/bin

   ./odu_low/phy/wls_lib

   ./odu_low/phy/fhi_lib/lib/build

8. Execution - Bringing up FAPI Translator of O-DU Low

   cd odu_low/phy
   source ./setupenv.sh
   cd odu_low/phy/fapi_5g/bin/
   ./oran_5g_fapi –cfg=oran_5g_fapi.cfg

9. Assign virtual IP addresses as follows:

   ifconfig <interface name>:ODU “192.168.130.81”
   
   ifconfig <interface name>:CU_STUB “192.168.130.82”
   
   ifconfig <interface name>:RIC_STUB “192.168.130.80”

10. Execution - Running CU Stub

    cd odu_high/bin/cu_stub
    ./cu_stub

11. Execution - Running RIC Stub

    cd odu_high/bin/ric_stub
    ./ric_stub

12. Execution - Running O-DU High

    cd odu_high/bin/odu
    export LD_LIBRARY_PATH=odu_low/phy/wls_lib/lib:$LD_LIBRARY_PATH
    ./odu