You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Next »

This design matches the requirements in the following USs: 

RIC-431 - Getting issue details... STATUS

RIC-432 - Getting issue details... STATUS

RIC-433 - Getting issue details... STATUS


RnibReader changes

We shall modify the ServedCellInfo message inside the Enb proto message:

Current enb.proto:

message Enb {
    EnbType enb_type = 1;
    repeated ServedCellInfo served_cells = 2;
    repeated string gu_group_ids = 3;
}

message ServedCellInfo {
    uint32 pci = 1;
    string cell_id = 2;
    string tac = 3;
    repeated string broadcast_plmns = 4;
    ChoiceEUTRAMode choice_eutra_mode = 5;
    Eutra.Mode eutra_mode = 6;
    NumberOfAntennaPorts number_of_antenna_ports = 7;
    PrachConfiguration prach_configuration = 8;
    repeated MbsfnSubframe mbsfn_subframe_infos = 9;
    string csg_id = 10;
    repeated string mbms_service_area_identities = 11;
    repeated uint32 multiband_infos = 12;
    FreqBandIndicatorPriority freq_band_indicator_priority = 13;
    BandwidthReducedSI bandwidth_reduced_si = 14;
    repeated NeighbourInformation neighbour_infos = 15;
}

We shall add the following:

message ServedCellInfo {
	...
	AdditionalCellInformation additional_cell_information = 16;
}

message AdditionalCellInformation {
	float cell_latitude = 1;
	float cell_longitude = 2;
	float antenna_height = 3;
	float antenna_azimuth_direction = 4;
	float antenna_tilt_angle = 5;
	float antenna_max_transmit = 6;
	float antenna_max_gain = 7;
	uint32 sector_id = 8;
}
  • No labels